PDA

View Full Version : General: Shelby Lancer part out



kuzman83
11-11-2014, 09:41 PM
Date: 12th November 2014
Username: kuzman83
Full Name: John Kuznicki
City, State, Zip: Findlay Ohio 45840
Contact: jkuznic@gmail.com PM or email for Phone number
Price: As noted in parts list, negotiable, shipping not included

Unfortunately it is time for another Shelby Lancer to hit the big junk yard in the sky. The car is complete other than the DEX, 1 center cap medallion and the dash plaque. It has too much Ohio DOT body modification to be repaired at this point (rust so bad you can see the pedals and check your tire pressure at the same time). As much as this pains me to see another one bite the dust, it is my goal to salvage as many usable parts as possible to help myself and others keep their cars on the road. I WILL have photos loaded tomorrow with my username in the shot. I will not have pictures of everything so if you are in need of pics of a specific part please PM or email me and I will get those to you. I will try to be as comprehensive as possible with the parts list but since this is an entire vehicle part out I'm sure I'll forget items, if you don't see it just ask. Car is a 5 speed/cloth option with 178xxx miles. It seems to have a blown head gasket and is only running on 3 cylinders right now.

Parts:

2 piece TII intake with injectors, fuel rail, regulator and TB $225
Shelby multi-piece gasket valve cover, no cracks $200
TII engine harness $75
TII Shelby logic module $100
IC/Rad combo $75 (can have pressure checked upon request but when I fired it up I did not see any leaks)
TII turbo core $100 (could be good, I bought the car for parts and haven't driven it so I'm not sure)
TII long block w/178xxx miles no knocks, haven't been in it so I can't attest to it's condition. $100
TII fast burn head unknown condition. Comes with cam and followers $75
TII IC lower and upper hoses $60
Mobile 1 under hood plaque, decent condition, will send pics upon request $40
Fox head fog lights, no covers, decent condition $50 for the pair. Pending
Shelby trunk/hatch medallion $100
SL ground effects, lip spoiler has damage at the wheel wells, side skirts are rough but have hardware, rear is in good condition pics upon request $200 for the set
SL black belt line moulding $10/piece
Rear view mirrors $20 ea
Shelby Steering wheel, weather cracked pretty bad but no chunks missing $150
Shelby horn button, don't know if it works as the horns are tested not functioning. I will confirm functionality of the button before I post a price but I wanted to make it aware that it is for sale
Dash with harness, gauges and trim pieces not included $40
Door panels $20/ea
WELL loved seats $50 for the set
A-520555 shifter assy. with cables, missing shift knob pattern piece $75
brake/clutch assy with cables $50
A-520 core (again could be fine, I haven't driven the car) $150
A-520/555 cv shafts, good boots $15 ea.
K frame with bobble strut mount $40
Window switches $5 ea.
Lock switches $5 ea.
Bumper covers front or rear $20 ea.
SL hood with very good condition CS vacuum line sticker and under hood padding $50
Overhead compass temp console $25
Doors $25 each
Hatch with glass and surface rust $20
gauge cluster/dash bezel $40
headlight switch $10
Pioneer rear speaker grilles with pioneer emblem on both $50
Glove box $15




I will add more parts as I remember them. Feel free to ask if you don't see something and I can look to see if it's broken/missing or still there. As stated above prices are negotiable so if you don't like what you see feel free to make an offer :thumb:

Thanks,
John

going4speed
11-11-2014, 09:57 PM
how about the rear seat latches to release the seat backs? Need both! Door surrounds around the door handles on the interior...and a shipping price on the exhaust to 77381

maddmannda
11-12-2014, 02:27 AM
Pic of two-piece please and overhead display.
Thanks, M

looneytuner
11-12-2014, 10:07 AM
SL grille and headlight bezels $50 for the set \
Headlight retention assemblies $25 for both
Distributor with HEP and cap $20
Shipped to 63043
PM total price with shipping and Paypal?

You might want to mention the parts also fit the GTS
Your prices are very fair.

ShelbyLancer455
11-12-2014, 01:07 PM
I'll buy all 4 door panels as long as their in decent shape. I'll look tonight and see if there is anything else too. Thanks

Vigo
11-12-2014, 03:21 PM
Sent you a PM.

ajakeski
11-12-2014, 03:22 PM
PM sent

5DIGITS
11-12-2014, 07:13 PM
PM sent (seats)

kuzman83
11-12-2014, 08:34 PM
To all inquiries. I am doing my best to get pictures and shipping quotes as requested. If I don't have them PM'd or emailed to you tonight you will hear from me by no later than tomorrow. I appreciate the interest!

Steve in VA
11-13-2014, 09:25 AM
I'd like the horn button, but didn't see a price listed above.

dodgeman87
11-17-2014, 01:54 PM
I need the black storage holder ( above the ash tray & below the radio ) held on by four torx screws. Usually the spring breaks and lid won't stay closed.

Thanks

minigts
11-17-2014, 03:43 PM
If the half shafts (2) and intermediate drive shaft (1) have not been taken and are in good shape, I will take all three. Shipping to 38049.

jl93sundance
11-18-2014, 09:01 AM
I'll take the foglights.

kuzman83
11-18-2014, 08:37 PM
I need the black storage holder ( above the ash tray & below the radio ) held on by four torx screws. Usually the spring breaks and lid won't stay closed.

Thanks

Unfortunately the cubby door is broken on this one as well.


If the half shafts (2) and intermediate drive shaft (1) have not been taken and are in good shape, I will take all three. Shipping to 38049.

No one has asked about these yet, I will PM you a shipping quote tomorrow after I take some measurements and weigh the parts.


I'll take the foglights.

Not a problem, if you could pm me your zip for a shipping quote that would be great!


Thanks everyone for your inquiries! I am working to get back with everyone as quickly as possible.

kuzman83
11-22-2014, 08:13 PM
UPDATE: Everyone that has paid for parts will be receiving tracking numbers tomorrow. I will be responding to PM's tonight and tomorrow for all other inquiries. Still plenty of parts available. I have been slammed at work this week which is causing the delays in PM responses. I appreciate everyone's patience.

Thanks!

GLHNSLHT2
11-23-2014, 09:15 PM
I need the cowl cover. Please read my post about removal here: Must be in good shape with no cracked fins.

http://www.turbo-mopar.com/forums/showthread.php?76726-Hbody-cowl-cover-and-hardware-needed-ASAP!&p=1063135#post1063135

kuzman83
12-06-2014, 06:35 PM
Cowl cover was already removed improperly, all the hold downs are snapped off. Sorry!

GLHNSLHT2
12-06-2014, 07:52 PM
that's ok, thanks for checking.

kuzman83
12-12-2014, 02:25 PM
Plenty of parts still available. Feel free to make offers!

contraption22
12-12-2014, 03:46 PM
Didn't see the ground effects listed. If available, price shipped to 19083?

fleckster
12-13-2014, 10:34 AM
What about the fenders? rusty? dents? paint condition? I seemed to have gotten a dent in my driver's fender while it was setting in storage in one of the places over the years.