89 or 90 Daytona Front Spindles

[minigts]

I only need the spindles, don't need the brakes or anything for the rear. Not too worried about the condition, as long as they aren't corroded to the point of not being usable. As a disclaimer, I am referring to the ones that use the 10mm bolt to hold the brakes in place and have the 4 bolt hubs.

Thanks!

[Xtrempickup]

Are ones from a 92 daytona es usable? I have some kicking around i dont need.

[turbovanman²]

Hmmmmmmmm, I'll check my stash.

[minigts]

Sounds good, let me know.

[cordes]

So if I'm reading this right, you're looking for the early big brake knuckles?

[minigts]

I think so. All I know is you can bolt the hubs in and the brakes are mounted with 10mm bolts. That's all I know. :)

[Lotashelbys]

I should have a set of 89-90 11" brake spindles