PDA

View Full Version : Turbos/Intercoolers: WTB .63 Chrysler Housing


ShelbyLancer455
10-08-2014, 09:15 PM
Need a .63 Ar Chrysler turbo housing. I have a T3/T4 turbos unleashed turbo with a .63 t3 ford housing. I have a Chrysler turbo manifold that was retapped with studs so i could mount a T3 flanged turbo but I'm having clearance issues with the two piece due to the angle with the T3/T4. I would like to just get a Chrysler housing instead if I can get one.
tryingbe
10-08-2014, 09:34 PM
PM sent.
GLHNSLHT2
10-08-2014, 09:57 PM
it's because the ford housing is almost a stupid On-center housing where the Chrysler housing is on tangent to the center like a turbo should be. Does anyone else make a housing that will work with the T3 exhaust wheel you have? The chryco ones are getting hard to find unless Tryingbe has one that will work. All my cars are getting GT turbo's because there's just nothing decent in a chryco setup anymore.
moparzrule
10-09-2014, 06:11 AM
What stage turbine wheel?
Rrider
10-09-2014, 11:53 AM
Any body got links to pics or threads so we can tell what we have? I have a .63 but its probably a Ford.
tryingbe
10-09-2014, 01:58 PM
http://www.thelostartof.net/tryingbe/forsale/46trim/IMG_5082.JPG
http://www.thelostartof.net/tryingbe/forsale/46trim/IMG_5083.JPG
http://www.thelostartof.net/tryingbe/forsale/46trim/IMG_5085.JPG
GLHNSLHT2
10-09-2014, 09:22 PM
And a ford for comparison.

http://www.atpturbo.com/mm5/graphics/00000001/t3%205%20bolt%20mau.jpg

look at the inlet compared to the centerline of where the wheel would sit.