View Full Version : Engine oil pan bolt size ?
homelessduck
10-07-2014, 12:22 AM
I have googled this but surprisingly I came up empty handed. What size are the oil pan bolts ? I don't have any to compare.
Thanks.
-Dallas
4 l-bodies
10-07-2014, 12:29 AM
8 X 1.25 x 15mm
Todd
supercrackerbox
10-07-2014, 01:29 AM
8 X 1.25 x 15mm
Todd
I should add: Four of those will use a 13mm socket. Those will go in the corners. The rest will use a 10mm socket. However, if you are working on an '89-up block (common block), you will also have one bolt that is a 6mm x 1.00. This one will go directly below the water pump's lower mounting bolt.
homelessduck
10-07-2014, 01:44 AM
Way to go and confuse me ! Haha. Are there bolt kits available to simplify this ? I was just going to get them at the hardware store.
supercrackerbox
10-07-2014, 02:11 AM
Well you definitely won't find the exact ones at a hardware store. But at least get the flange-head bolts so you still have the clamping force spread over a larger area without having to dick around with loose washers. Or you could try a junkyard or post a WTB ad here on the board. Good chance someone has some they'd give you for pretty cheap.
homelessduck
10-07-2014, 02:46 PM
Thanks for the help guys ! I'll post a wanted ad on here as suggested rather than trying to figure it out at the hardware store.
-Dallas
Chris W
10-07-2014, 08:13 PM
Way to go and confuse me ! Haha. Are there bolt kits available to simplify this ? I was just going to get them at the hardware store.
We have an oil pan bolt kit on our website.
Chris-TU
supercrackerbox
10-08-2014, 01:27 AM
Ha! there ya go!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.