bn880
09-23-2006, 11:54 AM
Hi once again , hope the forum remains healthy.
I'm running a modded BlueBerry cal (cant seem to register on moparchem forums properly) in a 2.2 T2 setup, with a G head and lowered compression, 3 Bar, +40 injectors, stock fuel pressure.
My issue is, that even after rescaling for +40, the system goes into stoichometric mode only after the engine is completely hot and in neutral only. Even after a hot start it can take 2 minutes before the O2 bounces. Otherwise I see a full 1V.
Also there is really no O2 bounce with no throttle in drive. Any ideas? I've been playing with the fuel tables quite a lot, and only after Increasing the no throttle table a bit, I actually got some stoich operation in neutral. Hmm...
I'm running a modded BlueBerry cal (cant seem to register on moparchem forums properly) in a 2.2 T2 setup, with a G head and lowered compression, 3 Bar, +40 injectors, stock fuel pressure.
My issue is, that even after rescaling for +40, the system goes into stoichometric mode only after the engine is completely hot and in neutral only. Even after a hot start it can take 2 minutes before the O2 bounces. Otherwise I see a full 1V.
Also there is really no O2 bounce with no throttle in drive. Any ideas? I've been playing with the fuel tables quite a lot, and only after Increasing the no throttle table a bit, I actually got some stoich operation in neutral. Hmm...