moparzrule
09-10-2014, 05:17 PM
INTAKE SOLD! Making new thread to sell the rail.
Date: 10th September 2014
Username: moparzrule
Full Name: Matt
City, State, Zip: Carlisle, PA 17015
Contact: PM
Price: $365+shipping for everything, $300+ shipping for intake/TB, and $75 shipped for the rail
Description:
Since I'm going with an Acannell intake and 58mm TB I don't need this setup that I was going to run. Professionally ported (obviously lol) 2 piece intake, original paint in fair to good condition meaning decently presentable on the upper half on the part you see. There's some scrapes on the back that I'll show in pics below but you can't see them when it's in the car.
Ported for 52mm throttle body, TB does not come with sensors. No charge temp sensor included, but I am including the manifold support bracket.
This manifold has been clearanced for use with a TU header, as you'll see on the one pic of the bottom of the manifold.
I will consider separating the lonewolf rail, PM for pricing. *note*- The right side bolt in the manifold is about 1/2 stripped out. If you are gentle and don't really wrench it down hard it works just fine. Shame the lonewolf rail only uses 2 bolts instead of all 4 but I guess that's just their design. But I just wanted to state this so there's full disclosure and you know what you are getting.
I will accept paypal and USPS money orders for payment, but add 3% for paypal payment.
Price is pretty firm, as if you break it down the prices on average are as follows-
$175 for a used 2 piece intake
$190 for porting plus shipping each way (ends up being closer to $250 because of shipping a core plus paying return shipping but I'll still use 190)
$25 for the 52mm TB (junkyard price, this one has been cleaned and is nice)
$75 for lonewolf rail
So that's $465 for these parts separately, so save $100 on the combo (actually more considering shipping costs). And the best part is this one is ready to go, no down time waiting for porting etc.
http://i105.photobucket.com/albums/m216/87wagon/Intake1.jpg~original (http://s105.photobucket.com/user/87wagon/media/Intake1.jpg.html)
http://i105.photobucket.com/albums/m216/87wagon/intake2.jpg~original (http://s105.photobucket.com/user/87wagon/media/intake2.jpg.html)
http://i105.photobucket.com/albums/m216/87wagon/Intake3.jpg~original (http://s105.photobucket.com/user/87wagon/media/Intake3.jpg.html)
http://i105.photobucket.com/albums/m216/87wagon/intake4.jpg~original (http://s105.photobucket.com/user/87wagon/media/intake4.jpg.html)
http://i105.photobucket.com/albums/m216/87wagon/intake5.jpg~original (http://s105.photobucket.com/user/87wagon/media/intake5.jpg.html)
Date: 10th September 2014
Username: moparzrule
Full Name: Matt
City, State, Zip: Carlisle, PA 17015
Contact: PM
Price: $365+shipping for everything, $300+ shipping for intake/TB, and $75 shipped for the rail
Description:
Since I'm going with an Acannell intake and 58mm TB I don't need this setup that I was going to run. Professionally ported (obviously lol) 2 piece intake, original paint in fair to good condition meaning decently presentable on the upper half on the part you see. There's some scrapes on the back that I'll show in pics below but you can't see them when it's in the car.
Ported for 52mm throttle body, TB does not come with sensors. No charge temp sensor included, but I am including the manifold support bracket.
This manifold has been clearanced for use with a TU header, as you'll see on the one pic of the bottom of the manifold.
I will consider separating the lonewolf rail, PM for pricing. *note*- The right side bolt in the manifold is about 1/2 stripped out. If you are gentle and don't really wrench it down hard it works just fine. Shame the lonewolf rail only uses 2 bolts instead of all 4 but I guess that's just their design. But I just wanted to state this so there's full disclosure and you know what you are getting.
I will accept paypal and USPS money orders for payment, but add 3% for paypal payment.
Price is pretty firm, as if you break it down the prices on average are as follows-
$175 for a used 2 piece intake
$190 for porting plus shipping each way (ends up being closer to $250 because of shipping a core plus paying return shipping but I'll still use 190)
$25 for the 52mm TB (junkyard price, this one has been cleaned and is nice)
$75 for lonewolf rail
So that's $465 for these parts separately, so save $100 on the combo (actually more considering shipping costs). And the best part is this one is ready to go, no down time waiting for porting etc.
http://i105.photobucket.com/albums/m216/87wagon/Intake1.jpg~original (http://s105.photobucket.com/user/87wagon/media/Intake1.jpg.html)
http://i105.photobucket.com/albums/m216/87wagon/intake2.jpg~original (http://s105.photobucket.com/user/87wagon/media/intake2.jpg.html)
http://i105.photobucket.com/albums/m216/87wagon/Intake3.jpg~original (http://s105.photobucket.com/user/87wagon/media/Intake3.jpg.html)
http://i105.photobucket.com/albums/m216/87wagon/intake4.jpg~original (http://s105.photobucket.com/user/87wagon/media/intake4.jpg.html)
http://i105.photobucket.com/albums/m216/87wagon/intake5.jpg~original (http://s105.photobucket.com/user/87wagon/media/intake5.jpg.html)