SCCA E-Production Race Car

[minigts]

Date: 16th July 2014
Username: minigts
Full Name: Jon Trotter
City, State, Zip: Mason, TN 38049
Contact: PM me for email/phone number if you don't have either
Selling or Wanted Price: $3000 FIRM, plus any fees with delivery

SOLD
Description:

For sale, 1984 e-Production SCCA competition car. Asking $3,000 (now with the included K frame) which is WAY less than what I have invested in it. More pics can/will be posted. If you want to see anything specific, please let me know. The highlights:


Mikuni carbs 44mm per side
15x7 Diamond wheels, +11mm (6)
15x8 Goodyear R600 Tires (4)
15x9 Goodyear R600 Tires (4)
SCCA compliant roll cage
Aluminum racing seat (1)
Relocated battery (behind passenger side seat area)
Fuel cell (10 gallons I believe)
Fire suppression system
Coil over suspension (IMSA, 1 of 10 sets made)
Strut tower brace
Camber plates (will confirm caster as well)
Brake ducting (front)
Service manuals (required for SCCA competition)
Wrapped header to collector
Remote oil filter
Oil cooler



Additional parts:

Spare 525 transmission
Spare timing distributor intermediate shaft
Spare drive shafts (1 equal, 1 unequal)
Spare original carb and intake (Eddlebrock, I think)
New in package control arm bushings (energy suspension)
Clutch cable (at least one, I think I have 2)
Spare fuel pump
Spare fuel filter
Spare CV boot (Mopar)
Spare roller cam
Spare set of (8) lifters, new in box
Spare set of brake pads (front)
Spare set of rear spindles (drum, but I think they are all the same)
Tons of shims (for rear camber alignment)
Mopar performance T-stat, new in bag
Spare cap/rotor/distributor assembly
Spare water pump assembly
Spare set of tail lights
Spare hood (damaged, but the original one that came with it)
Spare throttle cable



Even MORE additional parts - All parts powdercoated in 2010, holding up nicely


dual pivot K frame fit for an L body - welded mount for the 525 and 555 transmissions
control arms
ball joints
bushings (Polybushings.com)
1 1/4" sway bar made for an L body (LRE, I'm 99.99% sure)


There are more parts than this in the boxes, but these are the hightlighted items that are useful.

Things missing to allow logging race time to get SCCA license:

Transponder
Multi-point harness
Fuel sampler (this may not be required anymore, but what I was told when I purchased it)



Selling because I have a GLHS that I'm basically doing this to (autocross) and really don't have use for it. Car sounds incredible. 11:1 compression motor, N/A (i.e., no turbo), supposedly has a limited slip installed, but I'd have to confirm which type. Regardless, the car is set up for track. Flared fender add ons and handles like crazy. Yes I have run it and it was awesome down the street! :) More pics coming of the goodies and will update the list of parts that come with it as I realize all that is there. Price is fairly negotiable, but I'm losing money as it is, so within reason I'm willing to negotiate. Located in the Memphis, TN area and can help ship to wherever.


Videos and Pics no longer on Facebook

51105 51094 51093 51092 51091
51090 51089 51088 51087 51095
51096 51104 51103 51102 51101
51100 51099 51098 51097 51086
51085 51084 51073 51072 51071
51070 51069 51068 51067 51066
51074 51075 51083 51082 51081
51080 51079 51078 51077 51076
51065

[168glhs1986]

Anyone wanting to go vintage racing should buy this ASAP! Great piece of rolling and working history. Good luck Jon

[minigts]

Anyone wanting to go vintage racing should buy this ASAP! Great piece of rolling and working history. Good luck Jon

Thanks Mike! Yes, there are many things on this car that are unique and make this car a one of a kind. Going to confirm, but it has a very nice header on it, wrapped to the collector. Someone posted a header on Facebook and this one is the same, will check the size of the runners at the head to confirm the size.

[minigts]

Another bump. If you have any questions, please let me know. If not, please enjoy the pics. :D

[minigts]

Bump again. Inquire about the car, delivery, etc. if you have interest.

[contraption22]

#sunshinecharger

[minigts]

#sunshinecharger

That will be for the next owner to designate. :)

[85boostbox]

#tweetiebird

[168glhs1986]

eBay it Jon.

[Sgt Craig]

Hellbird

[minigts]

#sunshinecharger

Cute. :)



#tweetiebird

You guys are killin' me.



eBay it Jon.

I may if I don't get any responses from here. Kinda like dealing with people in the community. I know one person who wants the engine, but he won't get it without the WHOLE thing. :)



Hellbird

This is better than the two mentioned above. :D


Still looking to sell the car. I'll update the first post, but I will throw in a dual pivot K frame fit for an L body. This will include the K-frame, control arms, bushings, mount for the 525 already welded in place, but will also support a 555 trans bobble strut as well AND, AND.... a 1 1/4" sway bar made for the L bodies. I cannot confirm it right now, but this is one of the ones that LRE made back in the day. Whether they took a Daytona one and cut it down, I don't know. I do know that it looks like one that was made JUST for the car though. The shape and design looks identical to the stock bar, but it is larger. I've had this for probably 20 years now.

All parts were powder coated and were on the GLHS from 2010 to just recently. No rust or wear anywhere on this joker. With that, the price will be firm at $3,000, which is a steal, if I do say so myself. I can get pics of this if anyone is interest.

I will up the ante at a later point to include a 525 with a Shelby diff and girdle if this doesn't sell, but the price will go up with it.


This will make a great stocking stuffer. Get it in time for Christmas!!! :D

[DetroitTurbo]

Wow dude that car is amazing. Good luck with your sale.

[looneytuner]

PM Sherri 007!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!

[minigts]

Wow dude that car is amazing. Good luck with your sale.

Yeah it's pretty cool. I did not build it, unfortunately. :p Thanks man.



PM Sherri 007!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!

If she is interested and looking for one, she'll see it.

[minigts]

Gonna bump again. I don't want to go the route of eBay, but I may have to. :/

[minigts]

Oh, figured I'd bump this again. Still for sale and still OBO. :) Contact me for details or if you have general questions about the car, I will do my best to answer.

[ShelGame]

Kind of interested in the front suspension parts for my GLH. But, I'm afraid to ask a price. And, as they say, if you have to ask; it's too much...

[minigts]

Kind of interested in the front suspension parts for my GLH. But, I'm afraid to ask a price. And, as they say, if you have to ask; it's too much...

The cost of the suspension includes the car AND NA motor, $3000 or OBO. :D

[1984rampage]

PM sent

[minigts]

Thanks man! Another bump.

[minigts]

Car is sold and going to a good home!

[85boostbox]

OOOO where where where LOL

[minigts]

Guy out of Florida. He's looking to race the car and use it to it's potential. I only wish he were closer so I could be involved. I wish I had the time to spend on the car to race it. I drove it up the street to the carrier to load it and man it was fun to drive just for the 1.5 miles I went. An NA motor with the compression that thing has is all kinds of fun. :)