PDA

View Full Version : General: Wiring harnesses, Flashable SMEC, 6.5 Crabs



jonnyb
07-14-2014, 07:20 PM
Date: 14th July 2014
Username: jonnyb
Full Name: Jon Berube
City, State, Zip: Vernon, CT 06066
Contact: jon.berube@appliedinternetgroup.com
Price: See each item

Description: I'm going to start selling off some of my parts. For starters I have a couple wiring harnesses, a trunk/hatch mount battery box/kit, and 6.5 inch powder coated crab wheels.

Here are some pics and prices (shipping not included).

I have a P-Body turbo SBEC engine wiring harness for a 90 stick. I would like $150 OBO. Note - it does not have an injector harness, but does have most solenoids and other items, including the starter/positive harness.
http://www.turbo-mopar.com/forums/attachment.php?attachmentid=51005&stc=1http://www.turbo-mopar.com/forums/attachment.php?attachmentid=51006&stc=1

I also have a complete 93 IROC R/T engine harness (including positive harness). This harness is in working condition, but has previously had some repairs done to it, so it's definitely not as clean as the other harnesses I have. There's an orange wire snipped near the SBEC connector and the two wires to the HVAC system are snipped, and the factory battery terminals have also been replaced. The pdc cover is also cracked and doesn't snap closed. I've tried to show all of this in the pics. I would like $200 OBO for this setup.
http://www.turbo-mopar.com/forums/attachment.php?attachmentid=51007&stc=1http://www.turbo-mopar.com/forums/attachment.php?attachmentid=51008&stc=1http://www.turbo-mopar.com/forums/attachment.php?attachmentid=51009&stc=1http://www.turbo-mopar.com/forums/attachment.php?attachmentid=51010&stc=1http://www.turbo-mopar.com/forums/attachment.php?attachmentid=51011&stc=1http://www.turbo-mopar.com/forums/attachment.php?attachmentid=51012&stc=1

Trunk/Hatch mount battery box with wiring and kill switch - $50 OBO.
http://www.turbo-mopar.com/forums/attachment.php?attachmentid=51013&stc=1http://www.turbo-mopar.com/forums/attachment.php?attachmentid=51014&stc=1
4 powder coated 15 x 6.5 inch crab wheels. These are nice, but each one does have a minor blemish or two. All are 8 or 9 out of ten wheels. I would like $200 for these. Note: tires not included - I will be removing them shortly.
http://www.turbo-mopar.com/forums/attachment.php?attachmentid=51015&stc=1http://www.turbo-mopar.com/forums/attachment.php?attachmentid=51016&stc=1http://www.turbo-mopar.com/forums/attachment.php?attachmentid=51017&stc=1

ShelGame
07-14-2014, 07:42 PM
I'm not sure if it will work with Rob's newer USB setup

Just FYI - it will work with the USB cable and MP Tune.

jonnyb
07-15-2014, 09:33 AM
Thanks for the info Rob!

jonnyb
08-12-2014, 07:11 AM
Bump! SMEC and Lbody harness sold.

jonnyb
02-25-2016, 03:23 PM
Bump - still have a couple harnesses, the battery box and wheels.