T3 Parts, Spirit Parts, and Misc.

[Dohcturbo]

Date: 10th July 2014
Username: Dohcturbo
Full Name:Nick Young
City, State, Zip:Manheim,PA 17545
Contact: Dakracer@hotmail.com
Price: Make Offers

I'm clearing out my T3 parts:

I'm 45min from Carlisle in Manheim PA 17545


Here is a list of what I've put togeather so far, let me know if your interested in anything.
Drilled and slotted rotors front and rear
RDI intake manifold
Stock Cam Cores pair
Lonewolf Stage 2 Cams
Complete head with rockers
92 Spirit R/T 150MPH Cluster
Under drive pulley
3" down pipe
Stock Computer 91 Spirit R/T
Pair nice aftermarket headlights Spirit stock replacements
Strut tower brace
Panhard bar
Cam/crank sensor
Message center Spirit
Gauge pillar pod Spirit
Gauge pod for message center Spirit
Snorkel, tab broke on bottom
T3 block with arp studs
California car cover Spirit
Overhead console Both Spirit and daytona
New reman front brake calipers
58mm throttle body
Water neck
Engine brackets and accessories

Thanks,
Nick

I also have a 89 T2 wiring harness, 93+ lebaron header panel, and a 89 lebaron sunroof and a front mount intercooler kit off an 8V Spirit using a RX7 intercooler
I also have 2 GLH wheels, set of turbo minivan hub caps, set of 15" Shadow ES Hubcaps

[Turbo Joe]

more info on the head please. what year is it and is it ported or cracked or ?????? thanks :)
also how much for the head and how much for the cam/crank sensors?

[Xtrempickup]

How much for rdi intake manifold?

[Dohcturbo]

Head is off a 60,000 mile 91 Spirit R/T. Stock, no port work, never welded, not cracked.
Ran and drove fine when removed.
$800 for the head
$200 for cam and crank sensors
$800 for RDI intake, it is new never ran.

[MNmopar]

lone wolf cams price?

[Dohcturbo]

$350 for the cams

[Turbo Joe]

Ok cool let me know what year the head is. Its casted in between the cam gears on the head. I'll pass on the sensors though

[Dohcturbo]

Its a 91 casting head

[spearscrue]

I'm looking for a OEM valley/spark plug cover if you have one

[Dohcturbo]

I will have to look, I have tubs and tubs of T3 stuff so give me a couple days to dig thru it.
I know I have aftermarket Aluminum ones if you want one of those.

[butki1mr]

I need a few odds and ends to put into a Daytona IROC R/T:
1) Mounting bracket and hardware for stock air box to bolt it to the back of the head.
2) Air box with good heat shield.
3) LH rear marker light.
4) Drain plugs for spare tire well.
5) Fuse box cover for under the hood.
6) Hood bumpers (LH primarily).
7) Wiring harness to the O2 sensor at the turbo.

What do you want for the snorkel?

Thanks,
Matt

[Dohcturbo]

Hi Matt, let me look I may have an air box and bracket. I'm sure I have an O2 plug but I always run new wire to reroute it off the exhaust manifold.
$200 for the snorkel
thanks,
Nick

[horsinaround]

Happen to have a injector harness and how much do you need for the computer ?

Thank you

[Dohcturbo]

Let me check on the injector harness, $100 for computer

[moparzrule]

How much for the strut tower brace?

[Dohcturbo]

$50 for the strut tower brace

- - - Updated - - -

I updated the list with prices
Here is a list of what I've put togeather so far, let me know if your interested in anything.
Drilled and slotted rotors front and rear $50
RDI intake manifold $800
Stock Cam Cores pair $250
Lonewolf Stage 2 Cams $350
Complete head with rockers $750
92 cluster $250
Under drive pulley $50
3" down pipe $50
Stock Computer $100
Pair nice aftermarket headlights $50
Strut tower brace $50
Panhard bar $50
Cam/crank sensor $200
Message center $20
Gauge pillar pod $50
Gauge pod for message center $50
Snorkel, tab broke on bottom $200
T3 block with arp studs $50
California car cover $75
Overhead console $50
New reman front brake calipers $20
58mm throttle body $50
Water neck $50
Engine brackets and accessories

Thanks,
Nick

I also have a 89 T2 wiring harness $50 , 93+ lebaron header panel $50, and a 89 lebaron sunroof $20

[spearscrue]

Any luck on locating your OEM T3 valley cover??

[Turbo Joe]

Its a 91 casting head

wow I'm sorry i just noticed this response just now... I was wondering why it was taking a while.. I feel silly.
if you could get a few pics of the deck and valley and such if possible. i've bought a head before that was supposed to be in good shape but was actually not.. So i kind of like to have pics.

[Dohcturbo]

Spearscrue- yes I did. 3 of the bolt holes are ripped. I have pics I can send.
Turbo Joe- where do you want me to send them?

[Turbo Joe]

Pm sent

[spearscrue]

PM sent

[Turbo Joe]

pm returned, thank you :)

oh yea I'll need your paypal addy too.

[jonnyb]

What color/material is the car cover, and to confirm, is it one of their custom fit car covers for an IROC RT?

EDIT: Nevermind - I noticed in the very first post you mention Spirit in the car cover line.

[Turbo Joe]

head is sold :)

[Dohcturbo]

I updated the list with prices
Here is a list of what I've put togeather so far, let me know if your interested in anything.
Drilled and slotted rotors front and rear $50
RDI intake manifold SOLD
Stock Cam Cores pair $250
Lonewolf Stage 2 Cams $350
Complete head with rockers SOLD
92 cluster $250 Spirit
Under drive pulley SOLD
3" down pipe $50
Stock Computer $100 91 Spirit R/T
Pair nice aftermarket headlights $50 spirit Stock appearing
Strut tower brace SOLD
Panhard bar $50 Adjustable New
Cam/crank sensor SOLD
Message center $20 Spirit
Gauge pillar pod $50 Spirit 2-2 1/16" Gauges
Gauge pod for message center $50 Spirit 3-2 1/16" gauges
Snorkel, tab broke on bottom $200
T3 block with arp studs $50
California car cover $75 spirit stormweave gray
Overhead console $50 Have spirit and daytona
New reman front brake calipers $20
58mm throttle body $50
Water neck $50
Engine brackets and accessories

Thanks,
Nick

I also have a 89 T2 wiring harness $50 , 93+ lebaron header panel $50, and a 89 lebaron sunroof $20

- - - Updated - - -

I updated the list with prices
Here is a list of what I've put togeather so far, let me know if your interested in anything.
Drilled and slotted rotors front and rear $50
RDI intake manifold SOLD
Stock Cam Cores pair $250
Lonewolf Stage 2 Cams $350
Complete head with rockers SOLD
92 cluster $250 Spirit
Under drive pulley SOLD
3" down pipe $50
Stock Computer $100 91 Spirit R/T
Pair nice aftermarket headlights $50 spirit Stock appearing
Strut tower brace SOLD
Panhard bar $50 Adjustable New
Cam/crank sensor SOLD
Message center $20 Spirit
Gauge pillar pod $50 Spirit 2-2 1/16" Gauges
Gauge pod for message center $50 Spirit 3-2 1/16" gauges
Snorkel, tab broke on bottom $200
T3 block with arp studs $50
California car cover $75 spirit stormweave gray
Overhead console $50 Have spirit and daytona
New reman front brake calipers $20
58mm throttle body $50
Water neck $50
Engine brackets and accessories

Thanks,
Nick

I also have a 89 T2 wiring harness $50 , 93+ lebaron header panel $50, and a 89 lebaron sunroof $20

- - - Updated - - -

I Also found 2 complete T3 Shortblocks (need rebuilt)
and a T3 Header

- - - Updated - - -

I Also found 2 complete T3 Shortblocks (need rebuilt)
and a T3 Header

[domni058]

Hi do you have any pictures of the t-lll header and how much, thanks Doug

[horsinaround]

Just wonderingn if the rotors will still for sale and the condition ?

Thank yoy

[Dohcturbo]

Rotors are still available, and they are brand new in the boxes.
Thanks,
Nick

[horsinaround]

I will take the rotors. Paypal ?
Pm sent also.

[horsinaround]

I have the funds ready for the rotors boss. Let me know.

[Dohcturbo]

Updated List:
Again everything in Manheim PA 17545.

T3 Exhaust manifold $50
T3 Intake Manifold $50
T3 Crank Pulley $5
T3 Cam gears $50
T3 Power Steering pump $20
T3 PS pump bracket and belt tensioner $20
T3 A/C Compressor bracket $20
T3 A/C Compressor $50
T3 Coilpack $20
T3 Waterneck $20
91 Spirit R/T Computer $75
Spirit Traveler $5
Spirit California Car Cover Stormweave Gray $75
Spirit overhead console $50
Daytona/Lebaron Overhead console $50
T3 Shortblocks $150 Need Rebuilt
Cold Air Kit $25
Indy Intercooler $100
8V Non A/C Alternator bracket $20
2-5 lug Pizza GLH Wheels $50
4- Crab wheels with Kuhmo Victoracers 205/50 15 $200
Daytona Lebaron sunroof $20
93+ Lebaron header panel $50
89 T2 Wiring harness $50
T3 Wiring harness cut at firewall $50
T3 Titanium ValveSpring Retainers $150
Super 60 Fuel pump $60
MP Bobble strut $20
5 bolt 8V underdrive pulley w/belts $75
413 MP shift kit $35
AFPR $50
Forward Motion Boost cruncher $50
QTP Electric exhaust cutout $ 75
Apexi Electronic boost controller $300
Very tight Mitsu 88+ T1 Turbo $150

Thanks for looking,
Nick

[moparzrule]

Is the AFPR the same as the 8v ones? If so I'm interested. If you're not sure, if you could throw up a pic I could tell from that.

[Dohcturbo]

I believe it is as I used them on my VNT interchangeably. I have pictures but it says I don't have permission to upload them. I can send them thru text or email.
Thanks,
Nick

[moparzrule]

PM sent :)

[Dohcturbo]

Bump!
Updated List:
Again everything in Manheim PA 17545.

T3 Exhaust manifold $50
T3 Intake Manifold $50
T3 Crank Pulley $5
T3 Cam gears $50
T3 Power Steering pump $20
T3 PS pump bracket and belt tensioner $20
T3 A/C Compressor bracket $20
T3 A/C Compressor $50
T3 Coilpack $20
T3 Waterneck $20
91 Spirit R/T Computer $75
Spirit Traveler $5
Spirit California Car Cover Stormweave Gray $75
Spirit overhead console $50
Daytona/Lebaron Overhead console $50
T3 Shortblocks $150 Need Rebuilt
2-5 lug Pizza GLH Wheels $50
4- Crab wheels with Kuhmo Victoracers 205/50 15 $200
Daytona Lebaron sunroof $20
93+ Lebaron header panel $50
89 T2 Wiring harness $50
T3 Wiring harness cut at firewall $50
Super 60 Fuel pump $60
MP Bobble strut $20
5 bolt 8V underdrive pulley w/belts $75
AFPR $50
Forward Motion Boost cruncher $50
QTP Electric exhaust cutout $ 75
Apexi Electronic boost controller $300
Very tight Mitsu 88+ T1 Turbo $150

Thanks for looking,
Nick

[horsinaround]

Good seller here guys. Don't hesitate to buy from him.

[moparzrule]

Is the underdrive pulley for a commonblock or an 88 non CB 5 bolt?

[Dohcturbo]

I'm going with common block as I used it on my 90 VNT Lebaron.
Thanks,
Nick

[Vigo]

Looks like i was asking about some parts that already sold but im still interested in the shifter surround trim if you have one.

Thanks!

[91dodgespirit]

Have any lifters?

[Dohcturbo]

NO, I don't
Sorry

[CHRYNY]

I sent a PM regarding the cover.

[spork]

Do you still have the 91 spirit r/t stock computer? How about the stage 2 cams? Also, do you happen to have a t3 crank sprocket? The one that the timing belt runs on?

[HSKR]

Any updated list?

[Dohcturbo]

Bump!
Updated List:
Again everything in Manheim PA 17545.

T3 Exhaust manifold $50
T3 Intake Manifold $50
T3 Cam gears $50
T3 Power Steering pump $20
T3 PS pump bracket and belt tensioner $20
T3 A/C Compressor bracket $20
T3 A/C Compressor $50
T3 Coilpack $20
T3 Waterneck $20
91 Spirit R/T Computer $75
Spirit Traveler $5
Spirit overhead console $50
Daytona/Lebaron Overhead console $50
T3 Shortblocks $150 Need Rebuilt
2-5 lug Pizza GLH Wheels $50
4- Crab wheels with Kuhmo Victoracers 205/50 15 $200
Daytona Lebaron sunroof $20
93+ Lebaron header panel $50
89 T2 Wiring harness $50
T3 Wiring harness cut at firewall $50
AFPR $50

TBI Roller Cam
Spirit RT Intercooler
Spirit RT Bumper Covers
Spirit RT Side skirts
782 8V Heads
RH Spirit Headlight
Spirit RT 4 wheel disc setup
90+ rad intercooler setup
90+ non IC Radiators
Various Spirit RT Moldings
Spirit RT Shelby Lancer Wings


Thanks for looking,
Nick

[HSKR]

Does the overhead console include the temp/compass display that works?

[Lotashelbys]

Price shipped to 53566 for these items,thanks

T3 PS pump bracket and belt tensioner $20
T3 A/C Compressor bracket $20
T3 Waterneck $20

[85boostbox]

What's the deal on the T2 harness?

[spirit1991]

Nick, does the spirit front bumper cover have any license plate holes drilled in? also what color is it?

[Dohcturbo]

The console does include the display, however I never used it and have no way to test it to verify function.
Thanks,
Nick

- - - Updated - - -

Jackson,
$80 shipped for the 3
Thanks,
Nick

- - - Updated - - -

As far as the harness, I really don't remember. I think it's out of 89 Shelby Z, But might of been an 87.
I bought it for a GLH conversion that never happened.
Thanks,
Nick

[Dohcturbo]

I believe the Front bumper is Red with no license plate holes, but I will verify this when I get to my garage next.
Thanks,
Nick

[Zman]

Hi Nick

Your 4 wheel disc setup...how much? 11" vented rears?
Did you sell the 58 mm t body? Shipped to Ontario Canada L0R 1P0
my email is zmilovanovic@rogers.com. Thanks.