PDA

View Full Version : General: Annual Parts For Sale Thread



DOHCRT
06-08-2014, 03:48 PM
Date: 08th June 2014
Username: DOHCRT
Full Name: Vic Dobney
City, State, Zip: Phoenix 85032
Contact: DOHCRT@cox.net

The following parts include shipping to US address unless indicated with a "+" (Canada and OCONUS extra). I will post pix by request. Parts are used unless otherwise identified. I may consider interesting trades for TIII parts. Please use my e-mail instead of PM

WTB
91 Up Manual Transmission Input Shaft Seal Retainers. Must be in great condition with no major wear grooves.

92 up Spirit R/T Drivers Door Panel. Must be in excellent to perfect shape, especially the weatherstrip.

89 CSX Non-Recaro seat.


NEON
1 Powerstop Rotors for 94-99 Neon P/N 8339 (FT) And P/N 8340 (RR) $150.00
2 2001 Neon R/T Active Dual Path Intake with Gaskets and Actuator NOS $450.00

ELECTRICAL/COMPUTER
3 89 Mopar Performance TII $200.00
4 88 Calibration Innovations 18/21 PSI 40% Injectors 3 Bar $200.00
5 90 2.5 TI $100.00
6 88 TI $50.00
7 94 TII (From Mexican R/T) $200.00
8 90 2.5 TI Socketed $150.00
9 92 2.5 T1 5 Spd $200.00
10 91 Spirit R/T Underhood harness $200.00

DRIVETRAIN
11 52 mm T/B $50.00
12 Shelby Valve Cover (non o-ring) $250.00
13 Turbo Valve cover (o-ring) $40.00
14 2 pc Intake with fuel rail, injectors, harness and regulator $275.00
15 Centerforce pressure plate for Spirit R/T only 500 miles $100.00
16 Stratus 2.4 head with cams and gears, car was running when pulled $125.00
17 2001 PT 2.4 complete engine minus accessories. Supposedly 11 miles. New car was hailed out on car carrier. Condition unknown, but obviously little to no run time. $250.00 +
18 1.7 Omni vacuum advance distributor $25.00
19 TII Exhaust manifold $50.00
20 VNT Exhaust manifold $75.00
21 Early TI Intake Manifold Gasket Matched and Inlet Opened Up $25.00
22 NOS Radiator "K" Body?? P/N 4266553 $50.00
23 TIII K&N Air filter (Stock replacement) $25.00
24 Spirit R/T brakes (FT & RR with Rotors, Calipers, Adapters and Knuckles) $250.00
25 Spirit R/T "K" member (With control arms and sway bar) $150.00 +
26 89 Non-Lockup 2.5 Converter $50.00
27 2.2 Common Block Forged Crank $200.00
28 2.2 Common Block TIV Pistons and Rods $200.00
29 HKS RFL Blow Off Valve $75.00

INTERIOR
30 90 VNT Daytona Instrument Cluster Surround $50.00
31 90 VNT Daytona Steering Wheel Black $50.00
32 90 up Daytona Airbag (Black) (Hazardous must go Ground) $50.00 +
33 Spirit R/T Console and Armrest $100.00
34 Aftermarket Recaro Seat (Same style as the CSX, but with the mesh headrest) $125.00
35 Complete 89 CSX Interior (FT and RR seats and Door Panels) $1,500.00
EXTERIOR
36 Spirit R/T Side skirts $100.00 +
37 Spirit R/T Door molding ("intercooled multi-valve") $150.00
38 Spirit R/T Rear Spoiler $100.00
39 85 Daytona hood vent $50.00

INTERCOOLER
40 Neon SRT4 Intercooler $100.00
41 Saab Intercooler $50.00
42 Stock Intercooler Shelby Lancer $100.00
43 Stock Intercooler VNT Daytona $100.00
44 Stock Intercooler Spirit R/T $100.00
45 Stock Intercooler 89 Maserati TC $100.00
46 Radiator/Intercooler/Condenser/Fan (Spirit R/T) $250.00

Non-TM
47 E-58 Valve covers form Super Coupe $25.00
48 72-93? Small Block Pickup Headers (Dodge) $50.00
49 Small Block 727 Rebuilt with Hughes stall converter 2000 miles (Worked when pulled)(E-mail for build info) $150.00 +

A.J.
06-08-2014, 06:49 PM
ELECTRICAL/COMPUTER
3 89 TI $75.00


Is this price for each or all three? I'm looking for SMECs to have on hand as spares. I'm down to one.



DRIVETRAIN

17 2001 PT 2.4 complete engine minus accessories. Supposedly 11 miles. New car was hailed out on car carrier. Condition unknown, but obviously little to no run time. $250.00 +


Is this a turbo or N/A engine? I'm looking for a turbo short block to start building a forged lower end.

DOHCRT
06-08-2014, 08:32 PM
3 is the line number not the quantity. I might have more than 1. Its an 01, so N/A.

Chris65
06-08-2014, 09:24 PM
I am interested in the 88 T1 computer. Does it have the air box housing in good shape?

85boostbox
06-08-2014, 10:27 PM
Is this price for each or all three? I'm looking for SMECs to have on hand as spares. I'm down to one.



Is this a turbo or N/A engine? I'm looking for a turbo short block to start building a forged lower end.

AJ the n/a PT blocks are the same outside of rotating assembly and oil squirters. Oil pumps and turbos line holes are already there, just plugged.

A.J.
06-09-2014, 01:37 AM
3 is the line number not the quantity. I might have more than 1. Its an 01, so N/A.

Hold that '89 SMEC and any others you have for me. We can settle up next time we meet. Jon is coming by the shop Monday after work with his new car if you're interested in hanging out.


AJ the n/a PT blocks are the same outside of rotating assembly and oil squirters. Oil pumps and turbos line holes are already there, just plugged.

I know but I don't want to mess with having the oil squirter holes machined into the block.

Dominic
06-09-2014, 07:09 AM
PM Sent

DOHCRT
06-11-2014, 12:22 AM
Bump...All prices OBO and shipping included except where noted.

wallace
06-11-2014, 07:03 AM
The RT k member, is that a dual pivot? If so does it have cast or stamped arms and what size sway bar. Thanks.

kcvrodder
06-14-2014, 06:53 PM
Do u have pics of the complete 89 csx interior

DOHCRT
06-17-2014, 12:48 AM
Still replying to PM's.

Bump to the top...