PDA

View Full Version : Engine: Cb 2.2 oil pan.



bgbmxer
06-02-2014, 07:53 PM
Need a good 2.2 common block oil pan. I located in 17356 red lion pa if anyone local has one. Thanks

spiro440
06-02-2014, 10:05 PM
I got one. Can hand it over to Mike. I think he is pretty close to you (near rockville). His coming up to Montreal this weekend. If you don't find one let me know

bgbmxer
06-03-2014, 06:30 AM
I could be interested in that deal. Let me know what you want for it

bgbmxer
06-07-2014, 07:35 AM
Bump still lookin

Oggie Fisher
06-07-2014, 09:38 AM
They are availabe from RockAuto & Amazon.

bgbmxer
06-07-2014, 09:49 AM
They are availabe from RockAuto & Amazon.

Every pan I have ever found is pre 88 non common block or 2.5 not 2.2

Oggie Fisher
06-07-2014, 11:34 AM
DORMAN Part # 264209
$52.79
ATP Part # 103022
$59.79
I looked up for a 1990 2.2 Daytona.
Last I looked both were available on Amazon as well. Perhaps I am showing my lack of knowledge but I assumed CB
pans were interchangeable.

tryingbe
06-07-2014, 11:45 AM
He wants an common block oil pan used without balance shaft. (With a hump)

http://www.thelostartof.net/tryingbe/sold/commonblockoilpan/IMG_0006.JPG

Stop showing him the pan used with balance shaft. (Flat bottom)

bgbmxer
06-07-2014, 05:13 PM
He wants an common block oil pan used without balance shaft. (With a hump)

http://www.thelostartof.net/tryingbe/sold/commonblockoilpan/IMG_0006.JPG

Stop showing him the pan used with balance shaft. (Flat bottom)


Thanks for showing him for me. I grabbed one at the jy today for 20bucks thanks anyways

looneytuner
06-08-2014, 11:04 AM
Didn't they come on the 90+ na engines?

tryingbe
06-08-2014, 11:15 AM
Didn't they come on the 90+ na engines?

I don't think this has ever been listed, so here you go.

89 turbo (TII) 2.2 have no balance shaft pan.
89+ n/a 2.2 have no balance shaft pan.
89+ 2.5 RWD have no balance shaft pan.

89+ 2.5 (TI) turbo have balance shaft pan.
89+ 2.5 n/a have balance shaft pan.
90+ 2.2 (TIV, TII) turbo have balance shaft pan.


Calling a non balance shaft pan a 2.2 cb pan is not accurate, nor is calling the balance shaft pan a 2.5 cb pan.