Looking for a set of beehive springs

[Chris65]

Looking for a new set of 8 Comp 995s or PAC 1286s in case someone is getting ready to do a purchase. or I will split a set with someone. I cal get the 1286s for $180 for a set of 16. So if someone wants to go halves on a set of those, I would sell them for $90 plus shipping.

[shackwrrr]

I am interested, I've been putting off the purchase due to not wanting to pay the whole 180 up front. I have PayPal whenever you are ready.

[shackwrrr]

I've never heard of those PAC springs, any info on them?

[Chris65]

PAC originally made the 995 springs for Comp, but since then Comp has been outsourcing them to someone in Mexico. That doesn't necessarily mean they are bad, I just prefer to buy American made when I can. Here (http://www.racingsprings.com/1200-Series/PAC-1286/Item/214) are the specs on the springs.

Someone messaged me about half an hour before you regarding splitting a set of springs. If that falls through, you will be next in line. I will let you know either way. If a third person shows interest, I can also get a second set and distribute them out. It will save a few buck over getting them directly from that website, and they only sell them in multiples of 16.

[shackwrrr]

Ok, thanks I originally peeked at those pac springs on jegs site but they were listed wrong. They list them by the small end id and the 26995s are listed by the big id.

[The Pope]

BTW the Comps are nice being beehive, but they will have a full conical spring soon. That is different diameter all the way to the seat to offer more RPM stability.