PDA

View Full Version : Dyno'd Srt-4 today


1qk4dr
05-31-2014, 02:01 PM
Ran my Srt-4 on the dyno today with some good results on the stock clutch. Made 377.7whp and 442ft-lbs of torque.

04 Srt-4
Stage 3 Mopar Turbo
1025cc E85
255 pump
Thermal 3" w/Cat Exhaust
Typhoon Intake with Hose Collapse Fix,lol
wowzer
05-31-2014, 02:29 PM
do you have a build thread anywhere? i'm just starting to put my 2.4 back together and looking for about the same hp/tq goals as your car.
1qk4dr
05-31-2014, 02:59 PM
No build threads on this car. This is my 4th dyno since stock. If you have questions just send me a PM. These cars are too easy to get power out of.

Below is by memory, lol

Stock w typhoon 221whp 247 torque
Plus 93 can tune dsp 254whp 292 torque
plus thermal 3" 264whp 310 torque
Plus E85 1025cc injector 3bar 285 whp 373 torque
plus stage 3 turbo above
GLHNSLHT2
05-31-2014, 10:35 PM
boost levels?
1qk4dr
05-31-2014, 10:39 PM
boost levels?


26 lbs in the middle and 20 lbs 4000-6000 rpm
The Pope
06-03-2014, 12:41 AM
stock IC then?
1qk4dr
06-03-2014, 09:10 PM
Forgot to add I have AGP Mini intercooler.
1qk4dr
06-03-2014, 09:29 PM
https://www.youtube.com/watch?v=3bWq82TPGSo

Here's a Dyno Day video I made with the above numbers.
iTurbo
06-08-2014, 02:12 PM
Were you able to determine if the clutch was in fact slipping on the dyno?
wowzer
06-08-2014, 06:08 PM
are you running oem pistons/rods? need to order some this week and vacillating between oem srt pistons/rods/rings for around $450 or a set of forged JE pistons/eagle rods for $850. want to make a safe 400+ hp. did you do anything to strengthen the bedplate?
1qk4dr
06-08-2014, 11:06 PM
Were you able to determine if the clutch was in fact slipping on the dyno?
Yeah it did, does it when I get on it in 4th on thon thec road also.

are you running oem pistons/rods? need to order some this week and vacillating between oem srt pistons/rods/rings for around $450 or a set of forged JE pistons/eagle rods for $850. want to make a safe 400+ hp. did you do anything to strengthen the bedplate?

Oem Motor w 70000 miles. 20k plus miles with set up. I would consider getting upgraded pistons since its the weak link. I'd take it to 450 whp stock motor and no more after reading safe limits of this motor.