PDA

View Full Version : 1989 CSX-VNT rear skirt



Johnny
05-30-2014, 02:18 PM
1989 CSX-VNT rear skirt
Sold these once, still have the mold. Spendy to ship because of the size.
Pain in the ....to box up so they ship safe.
The guy who made them for me is long gone, along with the jig for the attaching bolts.
But I now have an original skirt to make a new jig.
I will be checking with a guy here in my town that makes Cobra kit cars about making these.
He said he would, but need to check on cost. Will do that soon.

I have been asked to make another run.
Asking if all who might be interested.
Price may or may not be the same as before depending on cost to make.


http://www.polybushings.com/pages/CSX.rearSkirt.html

turboshad
05-30-2014, 02:26 PM
1. turboshad

glhs727
05-30-2014, 06:31 PM
1. turboshad
2. glhs727
3. glhs727 (yes, I'll take 2!)

2.216VTurbo
05-31-2014, 05:50 PM
I'm in for one, my car has a dealer replaced unit that has the exhaust cutout, looks wrong:(

4 l-bodies
05-31-2014, 07:18 PM
1989 csx-t?

Johnny
05-31-2014, 08:29 PM
1989 CSX-VNT rear skirt

It would not let me change the heading after I posted. 1989 is the VNT.....sorry.

P-Unit
06-02-2014, 12:08 PM
Put me down for one.

Johnny
06-02-2014, 12:10 PM
1. turboshad
2. glhs727
3. glhs727 (yes, I'll take 2!)
4. Alan
5. P-Unit
6.
7.
8.
9
10.

Johnny
06-02-2014, 05:36 PM
Confirmed, price stays the same as it was years ago. ($350 plus shipping) Surprise!
When (if) we can get 10, we will make them. If not, we still will but
rather get the 10....so lets try.
Spread the word!

P-Unit
06-04-2014, 02:16 AM
What about some side skirts?

glhs875
06-04-2014, 05:40 AM
What about the front piece?

Johnny
06-04-2014, 08:05 AM
How many people would want the front or side ones?
the place doing these for me could do it. But I'd have
to check on mold costs and need perfect samples.

glhs875
06-04-2014, 12:28 PM
I would be interested in the front and rear right now. I think if you are going to offer this service you should at least make a small profit!

Johnny
06-06-2014, 12:47 AM
1. turboshad
2. glhs727
3. glhs727 (yes, I'll take 2!)
4. Alan
5. P-Unit
6. GLHS875
7.
8.
9
10.

Any more?
Maybe someone could post on the 'other" site. I can't, I am a vender.

ILIKESHELBYS
06-09-2014, 11:55 AM
I could sure use a front one!

CoolV300C
06-09-2014, 12:33 PM
I think you can still get front ones from kaninari.

Johnny
06-09-2014, 02:39 PM
I am handing the mold off to get these made while I take the trip to SDAC.
So whomever wants one put your name here by the end of this week.

Johnny
06-11-2014, 12:53 PM
1. turboshad DEPOSIT MADE
2. glhs727
3. glhs727 (yes, I'll take 2!)
4. Alan
5. P-Unit
6. GLHS875
7.
8.
9
10.

Any more?

Taking the mold in....if you are on this list, I am making one (or two) for you.
I would like a $50 deposit for each sent to GLHS289@hotmail.com via paypal.
Or mail a check to:

PolyBushings
P.O. Box 4283
Coos Bay, Oregon 97420

Then I can make an invoice for you. Then will ask for the $300 payment when they are finished up...plus shipping cost.
Unless you want to come pick it up.

Johnny
06-12-2014, 11:58 AM
One deposit made!

Johnny
06-16-2014, 10:17 AM
Not real serious? One deposit?

glhs727
06-16-2014, 10:54 AM
deposit for my 2 just made.....

Johnny
06-16-2014, 11:03 AM
Got it, thank you.
3 orders confirmed!

glhs875
06-16-2014, 12:56 PM
Deposit sent!

2.216VTurbo
06-16-2014, 03:52 PM
Sorry Johnny, been busy, at least I *meant* to do it last week:p I'll get on it...

Johnny
08-01-2014, 07:31 PM
These finally are being made next week. I have one but they made it way to thick, 4 layers, not 2.
It sure feels solid though. Correct ones start next week.

Since there seems very little interest in these, I am not making extras and then having to sit on them hoping they sell.

turboshad
08-06-2014, 12:34 PM
That's great Johnny. Thanks for making another run, you're a CSX saver! :)

Johnny
09-08-2014, 11:04 PM
1. turboshad DEPOSIT MADE
2. glhs727 DEPOSIT MADE
3. glhs727 (yes, I'll take 2!) DEPOSIT MADE
4. Alan DEPOSIT MADE
5. P-Unit No Deposit
6. GLHS875 DEPOSIT MADE

Got 5 made and will ship as soon as the fasteners are on.

Final payments will need to be made within two weeks.
I'll let you know when.

Johnny
10-27-2014, 09:02 AM
Sorry about the delay. Jig for the fasteners has been the issue.

88C/S
01-01-2015, 08:41 PM
If it's not too late, I could use a spare.

Johnny
01-01-2015, 08:58 PM
When I finish these....if I have one left...I'll let you know.

88C/S
01-01-2015, 09:08 PM
Ok, thanks

2.216VTurbo
01-01-2015, 09:30 PM
If it's not too late, I could use a spare.

When did you get a CSX?


Nomeeting tonight BTW...

88C/S
02-13-2015, 03:20 AM
When did you get a CSX?


Nomeeting tonight BTW...

Late October

88C/S
02-26-2015, 07:12 PM
I take it all were paid for. Let me know if you are doing another run of those skirts.

Johnny
10-25-2018, 05:42 PM
Finally these are in the process of being completed.