PDA

View Full Version : Maserati TC thermostat water box CNC machined



acannell
05-25-2014, 03:22 PM
$145 shipped!

Fits in the stock location and allows use of the stock o-ring, and thermostat housing.

Has 1" NPT threads for use with a barbed fitting for the heater hose.

The other holes are threaded 6mm x 1mm for use with stock hardware.

Stainless steel fittings can be purchased on ebay for less than $10 in the size of your choice.

Comes only with machined waterbox, no thermostat housing or barbed fitting is included.

CNC machined from 6061-T6 billet aluminum.

Replace your corroded, rotted thermostat housing with one of these!

The feeler gauge in the picture is 0.025" thick. (Courtesy of Reaper1!)

Check out this thread for the history of the design of this product and lots more pictures:

http://www.turbododge.com/forums/f321/f337/633513-masi-thermostat-box-9.html#post3241362

http://i1092.photobucket.com/albums/i413/rcktsrgn/2014-04-21205748_zps4a8ac8ef.jpg

http://i242.photobucket.com/albums/ff197/acannell/photobucket-11224-1398550345286_zps60f8ebfc.jpg

http://i1092.photobucket.com/albums/i413/rcktsrgn/2014-04-21204654_zps8d1ca21e.jpg

acannell
06-18-2014, 11:16 PM
only two left!