PDA

View Full Version : Blow off valve provision



player1up
03-28-2014, 10:41 AM
Does anyone have a BOV or a place to put one? Aaron's car has a 3/4 threaded ( capped off ) port on the intercooler piping but mine does not

Johnny
03-28-2014, 11:23 AM
I am installing one right now on mine. Was going to post photos when I was done.
Should have something by the end of the day.

player1up
03-28-2014, 01:23 PM
ah, ok, I installed one that I had kicking around from the turbo /6 that I threw on. I made a little pipe that goes in place of the hose between the airbox and the throttle body. The one I have is only to see how it behaves. Plastic one is kinda ugly but I have an aluminum one on the way. It seems to drive better all around.

Do you have the port on the intercooler pipe?

Johnny
03-28-2014, 02:18 PM
I am making a new pipe and air box mod between the TB and the inlet to the intercooler.
Running to get a couple pets right now that I need…...

Oh am NOT modifying my air box that came with the GTP, it is a spare I had.

Johnny
03-29-2014, 09:42 PM
I have the photos but they will not seem to load.

Johnny
04-03-2014, 07:31 PM
Mine works, this is what I did.

player1up
04-04-2014, 09:38 AM
ugh, I keep forgetting to snap some pics of mine... I have mine in a short tube right before the throttle body where the 4-5 inch hose used to be.

Fox
04-04-2014, 08:23 PM
these fit in that space really well
http://www.turbo-mopar.com/forums/garage_attachment.php?id=1580
http://www.turbo-mopar.com/forums/garage_attachment.php?id=1432

veto797
04-04-2014, 09:27 PM
Fox. Where do I get one of those?

Fox
04-04-2014, 09:49 PM
2.25 id and was available with 3 different bov flange options
got from PTP Direct, but it looks like they dont make them any more

http://members.ebay.com/ws/eBayISAPI.dll?ViewUserPage&userid=ptpturboblankets