View Full Version : Suspension: Knuckles
168glhs1986
02-20-2014, 07:38 PM
So the rear knuckles for the Consulier have been modified to accept a Pontiac Fiero brake caliper....and we can't have anything Pontiac on this car....
I'm looking for 2 good rear knuckles. 85-89 k car.
Shipped to 17340.
Thanks.
Mike
fishcleaner
02-21-2014, 12:26 AM
Rear knuckles?
iTurbo
02-21-2014, 01:56 AM
Rear knuckles?
That's what I thought. For the turbo Mopar cars, it's more like a back plate and spindle rather than a knuckle. I don't know squat about the Consuliers though.
minigts
02-21-2014, 02:38 AM
Pics?
I think he needs front knuckles, which are what was used on the rear of his Consulier.
168glhs1986
02-21-2014, 06:47 PM
Sorry, yes Pat is correct. I need front knuckles for the rear.
Like this
http://img.tapatalk.com/d/14/02/22/jusujy6y.jpg
thedon809
02-21-2014, 08:57 PM
If I could find some 91+ knuckles you could have mine off my 85 GLH. I have NOS mopar wheel bearings too.
168glhs1986
02-21-2014, 10:35 PM
Has to be k car knuckles. I have some 91 knuckes but saving those as backups for #168.
Unless you do have k car knuckles on the glh then we can swap :). You'd get the preferred knucles also i just cant use them on the Consulier.
My knuckles are in great shape and do not need bearings. I also have the other items you need for the swap. Front and rear.
Lmk.
If I can find them, I'd sell you the originals off my 86 K wagon turbo, I upgraded them to 94 units...
Shoot me a PM with whatever you feel is a fair price.
Mike
168glhs1986
02-21-2014, 10:56 PM
^^ thanks^^ price is kinda driven by condition.
I have a possible lead on a pair of new ones. If that doesnt pan out could you get some pics?
On ebay they are selling from $35 to $70 each and most with free shipping.
thedon809
02-21-2014, 10:59 PM
Has to be k car knuckles. I have some 91 knuckes but saving those as backups for #168.
Unless you do have k car knuckles on the glh then we can swap :). You'd get the preferred knucles also i just cant use them on the Consulier.
My knuckles are in great shape and do not need bearings. I also have the other items you need for the swap. Front and rear.
Lmk.That's right, l body knuckles are thinner where the strut bolts on.
They certainly aren't new, but seem to be in good, though dirty shape, I'd be fine with $30.00 each and a free ride, if you don't score the new ones.
Let me know where, and I'll send some pictures.
Mike
- - - Updated - - -
They certainly aren't new, but seem to be in good, though dirty shape, I'd be fine with $30.00 each and a free ride, if you don't score the new ones.
Let me know where, and I'll send some pictures.
Mike
168glhs1986
02-22-2014, 01:21 AM
They certainly aren't new, but seem to be in good, though dirty shape, I'd be fine with $30.00 each and a free ride, if you don't score the new ones.
Let me know where, and I'll send some pictures.
Mike
- - - Updated - - -
They certainly aren't new, but seem to be in good, though dirty shape, I'd be fine with $30.00 each and a free ride, if you don't score the new ones.
Let me know where, and I'll send some pictures.
Mike
Very cool, thank you. B in touch soon.
fishcleaner
02-22-2014, 01:58 AM
Sorry, yes Pat is correct. I need front knuckles for the rear.
Like this
http://img.tapatalk.com/d/14/02/22/jusujy6y.jpg
ok, don't post a picture like this without part numbers
168glhs1986
02-22-2014, 08:28 AM
^^ Todd at TCE Performance can put Wilwoods on your Omni. Give him a ring. I may do the same if this set works out well and Brian hasnt fired me after this project ;)
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.