PDA

View Full Version : MPTune rookie question



wallace
02-20-2014, 09:10 AM
I got my sbec and cable yesterday. Where do I connect the tuning cable? I looked for a connector at the ds strut tower but didn't see anything that looked like the cable end. This is a swapped sbec setup out of a 91 daytona.

tryingbe
02-20-2014, 12:12 PM
Is the SBEC socketed?

wallace
02-20-2014, 01:24 PM
Yes rob did the socketing

zin
02-20-2014, 02:19 PM
If the cable is like the one I have, you'll plug one end into the your laptop (usb) and the other to the port a scan tool or DRB would plug into, though I'm not sure where you'd find it on your car, on most of the cars I've got, it's on the pass side, and kind of tucked up away from things, might even have a rubber cap over it to keep it clean/uncorroded.

Mike

ShelGame
02-20-2014, 02:41 PM
There should be a plug attached to the harness bundle right near the SBEC 60 way. Its possibly plugged into a dummy plug, so you might not notice it.