PDA

View Full Version : TIII Breather/ Seperator Internals



DoubleD
02-13-2014, 11:34 PM
Decided to open up the Breather/ separator because I picked up a new "filter element" and going to install it. Took my dremel and cut it open found out there is no filter at all in there. Here is what the inside looks like, so needless to say I need a "new" one now. Whoops, at least now I know what is inside and so do you now!

http://img.tapatalk.com/d/14/02/14/4y8yjaqa.jpg

http://img.tapatalk.com/d/14/02/14/y6y4e6y9.jpg

zin
02-13-2014, 11:41 PM
Nice! Thanks for posting those pictures, I was curious, but not enough to get tools involved!

Mike

- - - Updated - - -

Nice! Thanks for posting those pictures, I was curious, but not enough to get tools involved!

Mike

DoubleD
02-13-2014, 11:48 PM
Yeah, now i need to find one to replace this one.

rich tideswell
02-14-2014, 02:25 PM
you can't glue it back together?

martin kolner
02-14-2014, 03:24 PM
the T3 separator is 4621033 I have 12 NOS at 40.00 each plus shipping

www.arizonaparts.com

mkolner14@hotmail.com for reply

135sohc
02-14-2014, 06:58 PM
ABS plastic cement and RTV...

lengel
02-15-2014, 08:06 AM
I think I have a few. You can have it, just pay the shipping.

DoubleD
02-16-2014, 06:01 PM
Dug through a few of my boxes and I found a spare, even better condition than the current one. Thanks though.