PDA

View Full Version : Turbos/Intercoolers: 90+ airbox to turbo hose and clamps



GLHNSLHT2
01-04-2014, 01:14 PM
Subject pretty much says it all, looking for the hose that goes from the airbox to the turbo with it's correct factory clamps in good condition, no cracking or tears and it's matching hose clamps for a decent price. Doesn't have to be NOS or anything just want one in good shape.

Thanks

ajakeski
01-04-2014, 08:20 PM
I think I have one. I'll look tomorrow.

GLHNSLHT2
01-04-2014, 08:49 PM
Thanks.

ajakeski
01-05-2014, 02:57 PM
Is this the one?

48421
48420

GLHNSLHT2
01-06-2014, 12:06 AM
That's the hose and clamp I'm looking for, I have a question though, I took your photos and turned the brightness and contrast up a bit. Looking at the indentation left by the small hose clamp, above that towards the larger clamp it looks like the hose might have a tear starting in it? Is that the case? hard to tell by just turning up the brightness and contrast. My hose has about 8 tears starting in that area so if your's has just 1 then it's not a deal breaker but I'm a bit concerned about it. I don't know what these hoses look like used most of the time. I shared the photos off my facebook so they're not the original size images where you can really zoom in :( Let me know, maybe you can take a bit better pic of the area too? Thanks

https://scontent-a-sea.xx.fbcdn.net/hphotos-prn2/1487301_3726995228848_1483956003_n.jpg

https://scontent-b-sea.xx.fbcdn.net/hphotos-prn2/1497625_3726995388852_261889204_n.jpg

ajakeski
01-06-2014, 08:50 PM
It's not a tear, it's a notch. Most likely so the line workers in the factory put it on the right way.

48431484324843348434484354843648437484384843948440 48441

GLHNSLHT2
01-06-2014, 11:57 PM
Thanks for the other pics, but the area I was talking about is marked in red in the photo below. Sorry if my other post made that hard to understand

https://scontent-a-sea.xx.fbcdn.net/hphotos-frc3/1482789_3729927502153_602259214_n.jpg

ajakeski
01-07-2014, 02:04 PM
It's a mark from the hose clamp. I do not see a hole or slpit when I flex the hose.
484454844648447484484844948450

GLHNSLHT2
01-07-2014, 08:21 PM
Thanks, So how much do you want for it?

ajakeski
01-07-2014, 09:54 PM
$20 plus shipping.

GLHNSLHT2
01-07-2014, 10:42 PM
cool, I'll pm you my addy.