View Full Version : General: Need Front Spindles
Does anyone have a pair of relatively rust free front spindles from a GLH or Shelby charger they can part with? It doesn't matter if they are 4 or 5 stud, with/without bearings. I just need spindles that accommodate the bigger(or should I say longer) GLH front wheel bearings. If you can, please pm me with pics and price shipped to 16145.
Thank you,
Dan
steve-o
09-24-2013, 08:08 PM
I have a pair from a lancer if that would help. They are still bolted to the strut assembly. You can have them for free if you come and get them. I live at zip 44255 which is about 80 miles from you.
Thank you for the offer, but I think the L-body spindles were unique to the Omni/Chargers. If I'm wrong about that then somebody please chime in and I'll be happy to come out and take them off your hands.
jaysshelby
09-26-2013, 01:10 PM
pretty sure I still have the spindles from a 84 Rampage I parted out. let me know if those will work for you.
supercrackerbox
09-26-2013, 02:10 PM
I'm pretty sure the GLH/Shelby Charger spindles are specific.
knownenemy
09-30-2013, 10:41 PM
Does anyone have a pair of relatively rust free front spindles from a GLH or Shelby charger they can part with? It doesn't matter if they are 4 or 5 stud, with/without bearings. I just need spindles that accommodate the bigger(or should I say longer) GLH front wheel bearings. If you can, please pm me with pics and price shipped to 16145.
Thank you,
Dan
I think I may have everything you need(other than the "relatively rust free" part).
These are from GLHS#0896:
http://i121.photobucket.com/albums/o208/signsoflife7/GLHS%200896/Spindles-GLHS_zps512642f9.jpg
http://i121.photobucket.com/albums/o208/signsoflife7/GLHS%200896/Spindles-GLHS3_zps84cee9b7.jpg
(Took the pics 5 minutes ago. Like my bedroom slippers? ^lol)
http://i121.photobucket.com/albums/o208/signsoflife7/GLHS%200896/Spindles-GLHS2_zps7eecafc0.jpg
http://i121.photobucket.com/albums/o208/signsoflife7/GLHS%200896/Spindles-GLHS1_zps9b506b0a.jpg
http://i121.photobucket.com/albums/o208/signsoflife7/GLHS%200896/Spindles-GLHS4_zps5c039299.jpg
After you have the bearings and hubs pressed out,
a little time in the blast cabinet and, you'll be like new!
Not sure what you were looking to spend but,
for these I'd want $50/ea +shipping
Pm me if you're interested.
Note; I also have the entire brake system from GLHS#0896 as well.
(Cross drilled rotors, calipers, caliper brackets,
rear drums, backing plates, shoes, wheel cyls, etc.)
Also, for sale^ :)
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.