supercrackerbox
08-26-2013, 12:36 AM
Date: 26th August 2013
Username: supercrackerbox
Full Name: Adam Steffen
City, State, Zip: Firth, Nebraska 68358
Contact: supercrackerbox1@gmail.com (please post in thread as well as email or PM)
Price: $150 shipped
This is the turbine housing I did for the GLHS. It has been ported with guidance of 5Digits, and ceramic coated in cast iron gray.
http://i123.photobucket.com/albums/o298/supercrackerbox/Turbine3_zps8d0add62.jpg (http://s123.photobucket.com/user/supercrackerbox/media/Turbine3_zps8d0add62.jpg.html)
http://i123.photobucket.com/albums/o298/supercrackerbox/Turbine1_zpscf3a1f7a.jpg (http://s123.photobucket.com/user/supercrackerbox/media/Turbine1_zpscf3a1f7a.jpg.html)
http://i123.photobucket.com/albums/o298/supercrackerbox/Turbine2_zps105ebc9e.jpg (http://s123.photobucket.com/user/supercrackerbox/media/Turbine2_zps105ebc9e.jpg.html)
Now here's the catch. I ported the wastegate hole to match the larger puck on the Turbos Unleashed 3" swingvalve housing I had planned on using. The puck on a stock 2.5" housing does cover the hole (barely), but the two we tried tonight have a tendancy for the puck to catch on the edge of the hole causing it to bind open. If you want to use a stock 2.5" housing, you can try your luck. Or better yet, if you have a way to put a larger puck in, or the TU 3" swingvalve, a custom swingvalve, or an external wastegate, then this is the housing for you!
This is the second of two .48 housings I ported, and easily the better of the two. It was supposed to go on the Charger tonight, but I had to use the first one due to the puck issue. I can assure you the Charger gained a very noticeable improvement in spool time and overall fun factor with the upgrade (which also included a ported/polished compressor housing and 2.5" swingvalve). While I don't have any hard numbers, the butt dyno says the car now accelerates harder than it did with the Super 60 we took off, with no other changes.
The price is $150 shipped, FIRM. Given the time, porting materials, and ceramic coating, I have way more than that into it.
Username: supercrackerbox
Full Name: Adam Steffen
City, State, Zip: Firth, Nebraska 68358
Contact: supercrackerbox1@gmail.com (please post in thread as well as email or PM)
Price: $150 shipped
This is the turbine housing I did for the GLHS. It has been ported with guidance of 5Digits, and ceramic coated in cast iron gray.
http://i123.photobucket.com/albums/o298/supercrackerbox/Turbine3_zps8d0add62.jpg (http://s123.photobucket.com/user/supercrackerbox/media/Turbine3_zps8d0add62.jpg.html)
http://i123.photobucket.com/albums/o298/supercrackerbox/Turbine1_zpscf3a1f7a.jpg (http://s123.photobucket.com/user/supercrackerbox/media/Turbine1_zpscf3a1f7a.jpg.html)
http://i123.photobucket.com/albums/o298/supercrackerbox/Turbine2_zps105ebc9e.jpg (http://s123.photobucket.com/user/supercrackerbox/media/Turbine2_zps105ebc9e.jpg.html)
Now here's the catch. I ported the wastegate hole to match the larger puck on the Turbos Unleashed 3" swingvalve housing I had planned on using. The puck on a stock 2.5" housing does cover the hole (barely), but the two we tried tonight have a tendancy for the puck to catch on the edge of the hole causing it to bind open. If you want to use a stock 2.5" housing, you can try your luck. Or better yet, if you have a way to put a larger puck in, or the TU 3" swingvalve, a custom swingvalve, or an external wastegate, then this is the housing for you!
This is the second of two .48 housings I ported, and easily the better of the two. It was supposed to go on the Charger tonight, but I had to use the first one due to the puck issue. I can assure you the Charger gained a very noticeable improvement in spool time and overall fun factor with the upgrade (which also included a ported/polished compressor housing and 2.5" swingvalve). While I don't have any hard numbers, the butt dyno says the car now accelerates harder than it did with the Super 60 we took off, with no other changes.
The price is $150 shipped, FIRM. Given the time, porting materials, and ceramic coating, I have way more than that into it.