View Full Version : Can anyone id these pistons for me?
jl93sundance
08-03-2013, 08:26 PM
I pulled the head off of one of my lancer and it had these pistons in it. Any idea what they are??
http://i214.photobucket.com/albums/cc49/jl93sundance/20130803_182216_zps07c42e68.jpg
http://i214.photobucket.com/albums/cc49/jl93sundance/20130803_182226_zps6bdc1a58.jpg
shackwrrr
08-03-2013, 11:10 PM
I think I remember Ross pistons looking like that. Nice find though.
BadFastGTC
08-03-2013, 11:31 PM
Keith Black hypereutectic was the first thing I thought of. The piston was something they offered some time ago with that D shaped dish.
tryingbe
08-03-2013, 11:46 PM
I think I remember Ross pistons looking like that. Nice find though.
Looks nothing like the ROSS pistons I have.
http://www.thelostartof.net/tryingbe/dodge/omniproject/Photo1923.jpg
GLHS60
08-03-2013, 11:59 PM
I think you are correct.
Thanks
Randy
http://www.cnc-motorsports.com/pistons-1/keith-black-kb268-50mm-hypereutectic-dish-pistons-3-465-bore.html
Keith Black hypereutectic was the first thing I thought of. The piston was something they offered some time ago with that D shaped dish.
jl93sundance
08-07-2013, 10:44 PM
Thanks for the help. Not what I wanted to hear, looks like I need to find different pistons then.
Better than stock, just a bit sensitive to detonation due to the high silicon content when compared to a forged, but not a "bad" piston.
Mike
OmniLuvr
08-08-2013, 12:03 PM
it lists on the site that they do offer them in a forged?
id run them, i like the quench design area for the swirl head... il buy them too if you remove them...
BadFastGTC
08-09-2013, 08:44 AM
They do not make them in a forged unit. I called them years ago and asked. They say these are heat treated to T6 specs.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.