PDA

View Full Version : Dynoed my junk today...



iniviate
08-23-2006, 05:39 PM
started off with stock fuel pressure on a fwd cal. 224whp @ ~16psi

after leaning it out a whole bunch, we ended up with 263whp at ~16psi

i tried to turn up the boost, but had problems with the wastegate. we also couldn't get a torque reading, as the RPM signal kept cutting out over about 4k rpms.

i'll see about scanning the dyno sheets and adding them in here in ust a minute. overall, i guess that's about what it's supposed to make. i guess i was hoping it would have made a little more than that. :( oh well, what can you do.

iniviate
08-23-2006, 05:47 PM
here are the dyno plots...

http://www.jaxracing.com/chris/shadow/shadowdyno.jpg

http://www.jaxracing.com/chris/shadow/shadowdyno2.jpg

turbovanmanČ
08-23-2006, 05:55 PM
If thats all stock, can't complain at those numbers, :thumb:

iniviate
08-23-2006, 06:12 PM
it's not completely stock, but it's nothing crazy....

shortblock is stock with arp bolts and venolia pistons, stock head, cometic HG, arp studs, stock intake an exhuast manifolds...

"power" mods...
GM 6.5L Diesel Turbo
Large GReddy intercooler off a MKIV soupra. i believe it's called a "4 row"
2.5" intercooler piping
3" Exhaust & "swingvalve"
FWD Stage 4 Computer
3 bar map, +40's, Walbro 255 Fuel pump.


perhaps the FWD computer is set really conservative on the timing because it's built for more boost than i'm running. i know the fuel was WAY off, as i'm at 32psi static fuel pressure now, and i'm still pretty safe.

turbovanmanČ
08-23-2006, 07:24 PM
Thats still good, you put down what the factory says it does at the wheels at 11 psi. :thumb:

iniviate
08-24-2006, 09:44 AM
Thats still good, you put down what the factory says it does at the wheels at 11 psi. :thumb:


i'm not following you... it was running ~16psi all day.

turbovanmanČ
08-25-2006, 04:01 AM
i'm not following you... it was running ~16psi all day.


The stock engine is set for 11psi. I said you put down at 16psi at the wheels what the factory rates the car at the crank AT 11psi, :nod:

Dave
08-25-2006, 09:13 AM
Good numbers. Does that second plot say Target A/F of 17.5:1??? :eek:

iniviate
08-25-2006, 12:40 PM
that's the max A/F recorded.... it must have been right as it went WOT.

Directconnection
08-25-2006, 12:46 PM
The stock engine is set for 11psi. I said you put down at 16psi at the wheels what the factory rates the car at the crank AT 11psi, :nod:

I have seen a bone stock r/t put down 220whp before on stock 11pi which we checked via scan tool on the runs.