View Full Version : 10mm head bolt question
csx452
06-15-2013, 01:29 PM
I've been trying to buy 10mm head bolts and no one sells them with the washers. Does anyone know of a source for these. I don't have old 10mm head bolts to get the washers from.Thanks,Frank
BadAssPerformance
06-15-2013, 05:07 PM
Have you tried our vendors? FWD Performance? Turbosunleashed?
The MP 11mm bolts come with extra washers that should work OK.
csx452
06-16-2013, 12:51 AM
Thanks for the heads up on the washers.I have lots of 11mm head bolt washers. Wasn't sure if they would work or not. I didn't try our vendors because the garage wants the car out. They have work backing up and the engine is being done as a favor.
4 l-bodies
06-18-2013, 11:53 PM
Try Ebay. Search for headbolts for 85 or 85 2.2. some as low as $10.
Todd
turismolover22
06-19-2013, 12:32 AM
If you need washers you can have mine from my head. I should still have all 10
kleiner
08-09-2013, 07:25 PM
Can you re-use old washers?
135sohc
08-10-2013, 09:26 AM
If the surface where the underside of the bolt head turns on the washer is smooth then I would reuse them.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.