CS logo R&D parts.

[DartGTS340]

Date: 05th May 2013
Username: DartGTS340
Full Name:
City, State, Zip: Florence, MT 59833
Contact: 4062145386
Price: Various sipped to lower 48
Description:

These are all parts I made while working out designs and process on CS logo parts.

These are not absolute perfection. The two medallion style inserts have minute imperfections in their clear coat, but are very presentable. Note the reversal of the checker flag in the upper two on the left.
http://www.x-plane.org/home/sideslip/images/SP/2/dump2.jpg
These medallions are an aluminum base. The silver of the logo is actually the aluminum itself. The checker flag is machined and not just globs of silver paint. The clear coat is not perfect. Price is each.
http://www.x-plane.org/home/sideslip/images/SP/2/dump3.jpghttp://www.x-plane.org/home/sideslip/images/SP/2/dump4.jpg

SOLD These center caps are designed to fit the center hole of pizzas, crabs, swiss cheese and other rims with a 1-7/8" hole with a 2" counter bore. I do not know if Centurions share these same dimensions or not. The fifth part is to show the overall design. Provided with all 8 O-rings installed. The blue in the logos have some discoloring that can be seen up close.
$160 for the set.SOLD
http://www.x-plane.org/home/sideslip/images/SP/2/dump5.jpg

These are inserts that were intended for a set of aftermarket rim centers. They are 1.975" in diameter by .16" thick. Overall a nice set.
$160 for the set.
http://www.x-plane.org/home/sideslip/images/SP/2/dump6.jpg

[zin]

Very nice looking pieces!

Mike

[minigts]

Ditto Mike, ditto. I can't remember, but are the flat larger medallions made to fit the size of the oil caps or just replacements for the trunk medallions? Looks good regardless even if these are 'seconds'.

[shmedley]

If the larger ones are for the oil caps I would be interested in one

[DartGTS340]

After making the parts on the left in the second pic I was told that the Shelby catalogue caps had a 1-13/16" diameter medallion. So they are larger by a 1/16". I've never possessed a Shelby oil cap. I had made an estimate from a picture of one and came up with the 1-7/8" The 1.96" diameter part was a test for something entirely different.

[DartGTS340]

Listing edited to reflect sales.

[J&H Ryan]

Any plans to make these for CSS Shelby Lancer wheels? As a previous owner who had the plastic centers - I was afraid to use them and the car always drove around capless except for pictures. Would have loved to have a $160 set that actually stayed in place...