New OBX with replaced hardware and A520 transmission for sale.

[Username]

Date: 01st May 2013 SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSO LDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLD
Username: Username SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSO LDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLD
Full Name:
City, State, Zip: Orange, CA 92869 SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSO LDSOLDSOLDSOLDSOLDSOLDSOLDSOLD
Contact: PM and I'll send a number if needed.
Price: $575 O.B.O. prefer not to ship, but if necessary, price does not include shipping or packaging. SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSO LDSOLD
SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSO LDSOLDSOLDSOLDSOLDSOLDSOLDSOLD

SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSO LD

Description: I have an OBX limited slip differential that I bought for my Csx-t, but ended up selling the car before putting it in. I've held onto it possibly wanting another TD, but have decided it's time to get rid of it. It comes with new carrier bearings I have already had pressed on as well as new output shaft seals and 2 new input shaft seals. As well as the hardware that was removed and replaced by turbosunleashed. Also included is an A520 trans from a shadow with a 350:1 final drive I pulled from a car in the yard to use while I swapped the one from my car. I haven't cracked the case, but went through the gears in the yard and made sure it drove the wheels in each gear. I was going to use the trans that was in my car with the OBX and run this one while I installed the unit, but if you want to use this one I'd open it up and make sure everything is in good condition first. I paid $510 for the OBX and hardware service and $140 for the transmission plus the cost of bearings and seals puts me a little under $700 into these parts. I can meet pretty much anywhere in orange county ca or even come to the TD meeting at applebees this thursday if anyone wants to check it out. Thanks.-Jarrodhttps://plus.google.com/photos/107859632969429284193/albums/5722474039122020529/5873140795576665698?banner=pwahttps://plus.google.com/photos/107859632969429284193/albums/5722474039122020529/5873140929198571122?banner=pwahttps://plus.google.com/photos/107859632969429284193/albums/5722474039122020529/5873140929198571122?banner=pwahttps://plus.google.com/photos/107859632969429284193/albums/5722474039122020529/5873140929198571122?banner=pwa

I don't know why my pics never show up when I use the Image thing, but here's the links
https://plus.google.com/photos/107859632969429284193/albums/5722474039122020529/5873140795576665698?banner=pwa
https://plus.google.com/photos/107859632969429284193/albums/5722474039122020529/5873140929198571122?banner=pwa
https://plus.google.com/photos/107859632969429284193/albums/5722474039122020529/5873142684979752322?banner=pwa
https://plus.google.com/photos/107859632969429284193/albums/5722474039122020529/5873142873331488802?banner=pwa


Also, I still have some parts left over from my last clearing out sale, here's the link if you're interested in anything
http://www.turbo-mopar.com/forums/showthread.php?64995-Getting-out-of-turbo-dodges.-Clearance-sale.&highlight= (http://www.turbo-mopar.com/forums/showthread.php?64995-Getting-out-of-turbo-dodges.-Clearance-sale.&highlight=)

[trannybuster]

Great ratio IMO, it will def. push the mpg way above a 3.85 ratio trans...with some tuning and 3.5o trans my Shadow went from 22mpg to 30+.....SO you will get payback in just fuel not to mention it has OBX! GLWS

[Username]

No one lookin to step up the handling and acceleration of their TD? I never got to use this on track with my Csx-T, but with all the wheel spin out of the corners it would have made a huge difference. Anyways, goin on ebay soon if no one here is interested. On the off chance anyone local has 350 chevy parts or World Class t-5 for a sbc or a t-56, or an even more oof an off chance a clutch style lsd diff for a datsun z car, I'm open to a trade.

[turbovanman²]

If you were closer and I had money, I'd buy that for my van as I have the shifter/cables.

[johnl]

I'm interested.
I'd want to see the parts.
Maybe next Thursday at Applebees?

[Username]

I could make that happen. I might not make it to the beginning of the meeting, but I'd be there before it ends. It's roughly from 7-9pm if I remember right? By next do you mean july? Or this thursday the 6th of june?

[johnl]

This Thursday the 6th and the meetings usually go on until later, dinner after dark so after 8 now and then guys stand around until midnight . . .

I'll PM you.