View Full Version : Electronics: 1989 & 1990 Turbo Minivan Wiring harness
1BADVAN
04-20-2013, 08:37 PM
Date: 20th April 2013
Username: 1BADVAN
Full Name:Matt lindsey
City, State, Zip: South Jordan UT 84095
Contact:PM
Price: $75 Each +shipping
Description:
COILS ARE NOT INCLUDED
1990 Turbo Van Wiring Harness $75
4478844789447904479144792447934479444795
1989 Turbo Van Wiring Harness $75 -Sold
44796
The 1990 one was pulled out of a running van about 2 months ago
the 1989 one was pulled a few years ago and seems to also be all intact
1BADVAN
04-29-2013, 11:10 PM
bump one down one to go
mudv216
07-02-2013, 11:52 PM
Would this harness be compatable with a 91 shadow 2.5 5 speed sbec?
1BADVAN
07-03-2013, 01:14 AM
Would this harness be compatable with a 91 shadow 2.5 5 speed sbec?
I do not think it would be a plug and play,
thedon809
07-03-2013, 07:26 AM
Isn't this the best setup to swap in an omni? If so I will take the 90 harness.
1BADVAN
07-03-2013, 11:04 AM
Isn't this the best setup to swap in an omni? If so I will take the 90 harness.
IDK i bet it all depends on what year your omni is and how much re-wiring you want to do, because it is definitely not plug and play. If you decide you want it, PM me
85boostbox
07-03-2013, 11:12 AM
A 90 van harness is only plug and play with a 90 omni/ horizon. 89 van harness are plug and play for glht and fuel injected models.
thedon809
07-03-2013, 12:32 PM
Wiring is the same just different style bulkhead connector?
1BADVAN
07-08-2013, 08:07 PM
Wiring is the same just different style bulkhead connector?
idk how much is different
turbovanmanČ
07-08-2013, 08:36 PM
Wiring is the same just different style bulkhead connector?
Its the same, hence why they are desirable.
bgbmxer
07-08-2013, 09:03 PM
A 90 van harness is only plug and play with a 90 omni/ horizon. 89 van harness are plug and play for glht and fuel injected models.
Everything pre 1988 was a different bulkhead connector and lm instead of smec if I'm thinking correctly.
thedon809
07-08-2013, 10:57 PM
Its the same, hence why they are desirable.I mean 89 vs 90 van harness.
1BADVAN
07-09-2013, 12:01 AM
I mean 89 vs 90 van harness.
The 89 is a SMEC the 90 is a SBEC
thedon809
07-10-2013, 04:03 PM
That shows how much I know about the different PCM and wire harness setups.
turbovanmanČ
07-10-2013, 08:17 PM
I mean 89 vs 90 van harness.
Same. IIRC, a few added wires but nothing major.
mudv216
07-11-2013, 08:21 PM
how much modification to the harness and bulkhead connectors would I need to do to make this fit in my T2 shadow with a 2.5 manual transmission?
turbovanmanČ
07-11-2013, 11:32 PM
how much modification to the harness and bulkhead connectors would I need to do to make this fit in my T2 shadow with a 2.5 manual transmission?
A lot, totally different harness's.
I have a harness out of an 89 TII Daytona, post up and see if that will work.
mudv216
07-12-2013, 10:06 PM
if it would work for me and is not all chopped up give me a price shipped to 44203 and ill take it!! :rockon:
1BADVAN
07-12-2013, 10:18 PM
if it would work for me and is not all chopped up give me a price shipped to 44203 and ill take it!! :rockon:
You have to decide if it will work for you, PM if you want it
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.