WTB Rear disc conversion stuff

[Daytana]

Looking for everything I need to convert my 1994 3.0L rear drum Lebaron to a rear disc setup (including parking brake cables). I am not looking for 11" setups, shoot me some offers. Thanks in advance. :thumb:

[turbovanman²]

I have the rear setup off a Daytona V6, just gotta see if its 10 or 11".

[Daytana]

Ok cool just let me know.

[Daytana]

Bump.

[turbovanman²]

Ok, they are 10" for sure, just need to figure out vented or solid, have to do some measuring. I have everything but the rotors and e-brake cables.

[Daytana]

How much for it all? And definitely let me know the if they are solid or vented. Thanks again.

[turbovanman²]

How much for it all? And definitely let me know the if they are solid or vented. Thanks again.

I'll look up some specs and remeasure monday. I'll pm you a price.

[Daytana]

Thanks.

[capev86]

the mini drum parking brake takes up X amount of space, so the rotor should be the same diameter on all 1989+ rear disc setups (they use the same brake pads). just vented vs no vented style. the non vented setup is a bit lighter and will squeeze into 14" rims whereas the vented 89 shelby / R/T setup requires 15" wheels or more due to the wider calipers.

[Daytana]

Bump, I know someone has got to have a basic 91+ solid rear disc setup. My rear drums are starting to grind now. :yuck:

[Force Fed Mopar]

I think I have that stuff, I'll look tomorrow.

[Daytana]

I think I have that stuff, I'll look tomorrow.

Ok cool, definitely let me know. :thumb:

[Force Fed Mopar]

the mini drum parking brake takes up X amount of space, so the rotor should be the same diameter on all 1989+ rear disc setups (they use the same brake pads). just vented vs no vented style. the non vented setup is a bit lighter and will squeeze into 14" rims whereas the vented 89 shelby / R/T setup requires 15" wheels or more due to the wider calipers.

The rotors are different diameters, the vented setup has 11" rotors, solid uses 10.25". Backing plates are different also. Parking brake setup stayed the same.

- - - Updated - - -


Ok cool, definitely let me know. :thumb:

Just looked, I don't have a solid setup anymore. There may be one at my local PAP I can pull and sell you, if the car is still there.

[spoolinhard]

I have one off an 87 shelby z

[Daytana]

Found a set from a pull a part 1 and 30 minutes away. Thanks anyways. :thumb: