Shadow vs SRT-6 Crossfire

[MILKCARTON]

So I was out playing the other night and hooked up a pretty quick SRT6, this car made 300 whp here in Colorado, and does not spin, pretty bad video but it was 2 a.m and 8 degrees out, was getting some wheel hop from the Shadow, the nitto's were trying thier best, oh yea, 4 point turn because of the welded diff :-)



http://s1151.photobucket.com/albums/o627/Tracey_Schetlizki/?action=view&current=GOPR0144.mp4

[2.216VTurbo]

So the Shadow is a 12second or better car? I know a thing or two about the SRT-6's and they are anywhere from 12.80-13.20 bone stock with decent street tires. 300 WHP means he has a CAI and a tune then? Doesn't sound like it has a pulley, usually another 30-35 WHP with those. 8 degrees, Brrr!

[MILKCARTON]

The Shadow ran a best of 13.16@107 with a five speed and a sick clutch last year, it has an auto now but a small compressor 50 trim(had a big cover last year) correct on the mods on the Crossfire, but it does have a pulley. It dynoed 300 rwhp here but i have no idea what correction they used(we are at 5800ft.) I hope the shadow will run mid 12's this year and I can get it in the 11's with some spray, my goal is an 11.999999 fwd auto 8 valve for 1000 bucks( the car weights 2150 with me in it :-)

[1BADVAN]

That's pretty awesome! I wish i had a place to store another car, I so would get an awesome street stalker like your shadow

[roachjuice]

Shadow is quick!!!

[MILKCARTON]

It runs pretty good, I am pretty happy with it, cant wait to run slicked up

[2.216VTurbo]

Woah, how'd you get a Shadow to 2000 lbs?? Yeah, clearly you took stuff out of it;) but what stuff?

[1BADVAN]

Woah, how'd you get a Shadow to 2000 lbs?? Yeah, clearly you took stuff out of it;) but what stuff?
I wanted to know that also and found this, I am sure he could make it more concise though.
http://www.turbo-mopar.com/forums/showthread.php?63794-How-light-can-I-get-an-89-shadow-2.5-turbo-5-speed-car-%28New-project-log%29&highlight=

[Vigo]

So auto means those shift points were like ~45 and ~80 or so? Yeah, that car is quick. Nice run!

[MILKCARTON]

I will have to check the mph that i shift at, alot of steering going on, so i never have looked

[MILKCARTON]

Woah, how'd you get a Shadow to 2000 lbs?? Yeah, clearly you took stuff out of it;) but what stuff?


It is completely gutted, no creature comfort at all, I was suprised when I finally weighed it too, gonna go to another scale to make sure its right, but it just feels really light to drive, only other thing im gonna do it the hatch and put in a small fuel cell, I would like to do an aluminum exhaust and muffler from the downpipe back also

[Force Fed Mopar]

It runs pretty good, I am pretty happy with it, cant wait to run slicked up

That baby 50 trim spools good huh :)

[MILKCARTON]

yea, almost too instant, gonna put my Greddy dual stage boost controller in it

[Vigo]

a small compressor 50 trim(had a big cover last year)

So does this just mean a t04b cover insead of an E cover, or a t3 cover or what?

[MILKCARTON]

the small turbo II size cover, and it has a .48 hot side

[Vigo]

Ahh ok cool. Is it still the stock turbine wheel too, or a bigger one in a machined stock housing?

[MILKCARTON]

Stock one

[Force Fed Mopar]

It's basically a stock turbo w/ a 50 trim compressor wheel and Turbonetics stock-type cover.

[3Bar_Mopar]

I had mine pretty light...it was around 2250 with a friend and I plus a load of copper at the scrap yard. Mine was gutted like normal, no rear bumper, no carpet, removed the spare tire well and covered the hole in sheet aluminum...pretty much anything I could think of was removed... I ran one seat also and no side glass at one time...