Winter plans?

[Kryp2nitE]

What are your plans this winter for your TIII/Masi?

So far for me:
http://img.photobucket.com/albums/v308/Kryp2nitE/Spirit RT/IMAG0392.jpg
http://img.photobucket.com/albums/v308/Kryp2nitE/Spirit RT/IMAG0393.jpg
http://img.photobucket.com/albums/v308/Kryp2nitE/Spirit RT/IMAG0394.jpg

[GLHNSLHT2]

hoping my tax returns will allow me to get it running.

[shackwrrr]

hoping my tax returns will allow me to get it running.

Same here, I got the car ready just need to rebuild the engine.

[GLHNSLHT2]

I got the parts, just need to pay for the machining of the block and crank.

[86Shelby]

Let it sit.

[GLHNSLHT2]

Tapped my oil return into the block. :)

http://www.pnw-sdac.org/gallery/v/Members+Rides/Jay+Jochec/87+Daytona+ShelbyZ/Two+Five+Masi/2012-12-22_13-04-29_347.jpg.html

[jckrieger]

I replaced the leaky head gasket with a Cometic MLS gasket and have a flashable SBEC on order. +40's, a 3 bar map, and a decent 15psi calibration will soon follow. After that I'm sure it'll need a fuel pump and will likely need a higher capacity clutch.

[rx2mazda]

full rebuild. bulletproof bottom end. bodywork.

[Turbo224]

Replaced cracked exhaust manifold, install zietronix, stage 3 comp, +40's.

[440dart]

I like the white what color is the car and the white comp housing with the blacked out holset looks awsome, As for me hopeing to get the rolligon job in ak if i do, fully ported head some big valves, cams, lengel intake, standalone, get machine work done to put my venolias and h-beams in and then install in my mint omni glhs next couple years there are going to be some very potent 16v omnis running around i know of a 600+ whp omni in the works cough cough lengle :)

[turbovanman²]

Fix my rust, headliner and fix the miss I got near the end of the year, sucked alot of crud in when my air filter piping came apart, :(

[Reaper1]

Pay off, ship, install, and get running my Masi engine. Also going to redo all of the body seal sealer and I'm going to probably repaint the engine compartment.

[jckrieger]

Since the R/T has been running great after the headgasket installation, I'll be installing titanium valve spring retainers, valve stem seals, and a new timing belt idler and tensioner. After that, the 3 bar map, Walbro fuel pump and +40% injectors will be going in. I also have a progressive alcohol injection system that might find a home on this car.

[bahelion89]

BC custom coilovers? if the budget permits and are still available...new pistons, head work, and others things if the girlfriend doesnt keep spending my money