need to know were to hook my gvavle up

[5sp. mini]

got my daytona back from ohio robs yesterday now i need to finish the vacum routing. look to run my g valve up one end goes to the watse gate can then the other end must run to vacum. any imfo will be a hand it is a ti clocked to be a t2 setup.

[Rrider]

Make sure nothing tees off of the line on the WG side of the valve. You can feed the valve from the intake manifold or directly from the turbo compressor housing. Or intercooler, etc..

Also make sure the ball is facing the feed side. The spring and bleed hole should be towards the WG end of the valve.

[ajakeski]

From the master:
http://www.gusmahon.org/html/boostcontrol.htm

[5sp. mini]

thank alot

[Rrider]

Gus's site is where I first found out about the existence of turbo minivans and g-valves! Took me about 15 years between finding his site and getting a mini tho.