T1 inlet conversion adapter

[ChargedDust]

Need an inlet adapter for converting an older T1 to use as a T2

[roachjuice]

Turbos unleaded has them.

[ChargedDust]

Hoping to get one a bit cheaper, and the last time I tried to get one they didn't have any, same at FWD.

[4 l-bodies]

You might consider listing a WTB TII compressor housing, or bad (core) TII turbo. They usually go for the same money as the adapters.
Todd

[turbovanman²]

Use the log 3 bolt inlet I believe, needs some minor reworking.

[BoostedDrummer]

I used the stock T1 suck through intake piece that bolts to the inlet of the turbo. Just cut it off to where I could fit a hose over it, easy.

[BoostedDrummer]

Turbo conversion (http://www.thedodgegarage.com/turbo_con.html)

[ChargedDust]

I used the stock T1 suck through intake piece
Don't have one of those either.


You might consider listing a WTB TII compressor housing, or bad (core) TII turbo. They usually go for the same money as the adapters.
Todd
Might go that route eventually, but just want the adapter for now.

[turbovanman²]

Don't have one of those either.


I might, I'll check in a bit.

[tryingbe]

I have this, PM sent.

http://www.thelostartof.net/tryingbe/forsale/tiihousing/IMG_0008.JPG