PDA

View Full Version : 3" downpipe doughnut for our td's



Mr overkill
08-28-2012, 11:43 AM
anyone happen to know a walker part # so i can pick one up local. i have a car coming in tommorrow and need it then if not then ill have to order one from chris and wait a week

shackwrrr
08-28-2012, 12:27 PM
Felpro 61089 is a 3" flange gasket that I think will work

shackwrrr
08-28-2012, 01:07 PM
This should cover it

Shadow
08-28-2012, 02:08 PM
Hey shackwrrr, got a sheet for 3" flanges like that? :)

shackwrrr
08-28-2012, 02:31 PM
Hey shackwrrr, got a sheet for 3" flanges like that? :)

2 or 3 bolt

41260

41261

41262

Mr overkill
08-29-2012, 08:59 AM
so from the walker page it seems its a 31556 correct

shackwrrr
08-29-2012, 09:04 AM
Yep, the tu gasket I had was about that thickness too.

Shadow
08-29-2012, 12:51 PM
2 or 3 bolt


2 bolt

csxtra
08-30-2012, 02:08 AM
anyone happen to know a walker part # so i can pick one up local. i have a car coming in tommorrow and need it then if not then ill have to order one from chris and wait a week

Walker part # 31556
ROL part # EG24917
Maremont part # 521027
AP part # 8742

Fits 1990 Cadillac Eldorado Base 4.5l v8 vin 3

If you have an O'Reilly's near you, they sell the ROL part, but it is usually an overnight part, not even stocked in the bigger stores.

Hope this helps.

bgbmxer
09-15-2012, 07:41 PM
Anyone have a napa part number?

black86glhs
09-15-2012, 07:54 PM
Anyone have a napa part number?
Exhaust Gasket (http://www.napaonline.com/Catalog/CatalogItemDetail.aspx?R=EXH31556_0136036966)Part Number: EXH 31556
Product Line: NAPA Exhaust

bgbmxer
09-15-2012, 09:54 PM
Exhaust Gasket (http://www.napaonline.com/Catalog/CatalogItemDetail.aspx?R=EXH31556_0136036966)Part Number: EXH 31556
Product Line: NAPA Exhaust

Thanks a ton.

black86glhs
09-15-2012, 10:07 PM
:thumb: Your welcome.

bgbmxer
09-16-2012, 04:43 PM
While this thread is still going I picked up the donut today and it seems right.

My dp necks down to a 2.5 and I'm cutting it off to fit up to my tu 3 inch sv question is does anyone sell the bracket that the bolts go thru to hold it to the sv in 3inch