a413 into l body

[wowzer]

contemplating putting my a413 out of my 89 turbo van into my 87 shelby charger (with '88 2.2 t2 and getrag 555 5 speed). will this work? got a link to a swap writeup?

[RoadWarrior222]

Should work like it was made to fit.... issues will be, correct flexplate, correct axles, correct mounts, but those are all available, nothing custom.

[wowzer]

just making sure. thx.

[finallall]

I use one in my current omni and love it. Although my omni was originally an auto.

[turbovanman²]

Yes, it will work fine, don't forget that L body's came with auto's. Just use 88-90 auto L body axles as L body's only got small spline.

[cordes]

Heresy.

[GLHS60]

You left out MANUAL.

Thanks
Randy



Yes, it will work fine, don't forget that L body's came with auto's. Just use 88-90 auto L body axles as L body's only got small spline.

---------- Post added at 03:05 PM ---------- Previous post was at 03:02 PM ----------

Any problem with intercooler hoses with the automatic?? Stock intercooler??

Thanks
Randy



I use one in my current omni and love it. Although my omni was originally an auto.

[turbovanman²]

You left out MANUAL.

Thanks
Randy




---------- Post added at 03:05 PM ---------- Previous post was at 03:02 PM ----------

Any problem with intercooler hoses with the automatic?? Stock intercooler??

Thanks
Randy

Manual only got small spline so you HAVE to use 88-90 auto axles or make something up.

Not sure about IC hoses but regular cars have no issues with that when running an auto with the stock IC setup.

[Keito]

GLHS hose will not clear an auto.
I tried it, I made a hose from a radiator hose from NAPA, hat the 90 and 45 all in a one.