PDA

View Full Version : Re-did my gauges and radio... what do you think?



zshadow
08-07-2006, 05:43 PM
at first i basically drilled 3 holes and JAMMED 3 gauges into them and screwed it into the trim piece, after deciding that it looked like ---- i re did it. dont worry about the black marks at the bottom of the trim piece, its just marker that i needed to get the gauges lined up.

what do you think?

http://img392.imageshack.us/img392/4037/dsc01556re7.jpg

Whorse
08-07-2006, 05:52 PM
Looks sharp. Clean, aligned well. Nice work.

Bardo
08-07-2006, 05:55 PM
when i did my daytona i put my radio where your gauges are and gauges where the radio is. i made a fiberglass piece to do so

Turbodave
08-09-2006, 06:24 PM
Looks good!

Garret
08-10-2006, 04:34 AM
Might want to make angled rings so you can see it better from the driver's seat just go get some 2inch ID PVC piping and pie cut them to be angled then just dremel it out a bit so you can fit the 2 1/16th gauge in

Tony Hanna
08-10-2006, 05:59 AM
Might want to make angled rings so you can see it better from the driver's seat just go get some 2inch ID PVC piping and pie cut them to be angled then just dremel it out a bit so you can fit the 2 1/16th gauge in

That's a good idea.:thumb: I couldn't see all of the boost gauge in the Daytona from having to look at it from the side and it bugged me. I'll try that in the Sundance when I install the gauges.

Dave
08-10-2006, 02:20 PM
Looks great! I did the same for my Spirit. It's a good spot overall.