View Full Version : TIII Holset boost conrol threads
J&H Ryan
05-22-2012, 05:33 PM
Any idea what threads are in that fitting? Id rather not grind it out, and seems like a good spot to mount a barb for my mbc. Anyone?
Kryp2nitE
05-23-2012, 09:54 AM
HE351?
Diesel Auto power sells one pre tapped for a boost elbow.
http://www.dieselautopower.com/product_p/he351%20solenoid%20cap%20tapped.htm
Lotashelbys
05-23-2012, 10:11 AM
I always just drill and tap it for 1/8NPT and install a 1/4" hose barb for the boost pressure source.....
J&H Ryan
05-23-2012, 01:36 PM
Turbo is in car now, I changed plans and need that source now. That link is what I want, but at 10x the price. No idea on threads, might have to just guess and check.
Kryp2nitE
05-23-2012, 03:38 PM
I've got a couple HE351's at home. I think one has a solid plug in it (he blocked off the wastegate). You can tap it if you wanted on your own. I can check when I get home
Kryp2nitE
05-23-2012, 06:26 PM
Ive got the plug if you want it. Just checked.
J&H Ryan
05-23-2012, 09:45 PM
For sure - PM your paypal and what you want for it shipped - i cant say for sure when I'll go to SDAC BWW next
Juggy
05-28-2012, 05:32 AM
tap the hole 1/8th in the car. just blow out any chips with constant air fed through inducer
Kryp2nitE
06-18-2012, 04:09 PM
Hope it works out for you,
Found the specs for HE351 vs HE341 too when I was looking through my notes.
HE351 is 60/60/9
HE341 is 54/58/9
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.