View Full Version : taking off old shocks
shelbymonster
04-19-2012, 06:02 AM
i need to take the rear shocks off on the 87 pacifica and the bushings of the shocks are stuck on the bolts ,is there a easy way to remove or i have to take the torch and cook them ? they are still good but i think i may have to change them
raccoon
04-19-2012, 06:28 AM
I use a grinder and cut them open, then remove the rubber and beat the collar open/free.
shelbymonster
04-19-2012, 06:32 AM
thanks ! im gonna order some shocks later lol
---------- Post added at 06:32 AM ---------- Previous post was at 06:30 AM ----------
all this to get a stiffer rear spring ...
turbovanmanČ
04-19-2012, 12:55 PM
Heat, penetrating fluid, torch's, hacksaw, lots and lots of patience.
shelbymonster
04-19-2012, 01:04 PM
Heat, penetrating fluid, torch's, hacksaw, lots and lots of patience.
yeah i wanted to keep them but ... time to get new shocks lol
Dony409
04-19-2012, 01:30 PM
You want to get the bushing out of the shock? I used a torch and an air chisel
shelbymonster
04-19-2012, 02:04 PM
You want to get the bushing out of the shock? I used a torch and an air chisel
no the bolt is seize inside the bushing , anyway , 2 new shocks are on there way
135sohc
04-19-2012, 05:00 PM
Dip all the new bolts in anti-seize before installing..
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.