t3 R/T header

[glhs727]

Date: 17th April 2012
Username: glhs727
Full Name: cindy lindsay
City, State, Zip: spring tx 77373
Contact: Text to 281-642-3878 or phone 281-288-4411
Price: $400 plus shipping

Description: serious header. Has t3 lotus header flange, t4 turbo flange. Wrapped in thermal wrap. This is a big tube header, and I cannot guarantee fitment. I beleive this was an old header used at one time on Stephane's race car, but don't know for sure. I know it has been sitting here for the last 6 years gathering dust. The tubes measure 2.21" with the wrap so i would venture a guess that they are 1 7/8" diam. $400 is a good price as a custom header would likely run in the $900+ range. modification may be necessary, IDK.. so this is sold AS IS!

[Juggy]

a meaasurement from flange to flange might help determine whether or not people will want to take a chance on it fitting between the engine and firewall.....

[turbovanman²]

Damn, very nice.

Looks like it won't clear the firewall, its way too wide/long looking at the pics.

[glhs727]

distance is a little less than 10" and yes, I'm sure some firewall changes will be required or do some modifications on the header

[turbovanman²]

Must resist!!!!

[J&H Ryan]

Considering my Holset is a mm away from the firewall (haven't swapped to poly mounts yet though) I think this would put the turbo somewhere into the HVAC controls...

[glhs727]

Considering my Holset is a mm away from the firewall (haven't swapped to poly mounts yet though) I think this would put the turbo somewhere into the HVAC controls...
You could always box out the firewall, which is what had to be done on our shadow that ran a 2.4 with a big precision 6262 with a header.
or you could modify the header somewhat to change the angle to get better clearance.
Anyway, I need this gone! Bump to the top!!