1966 dart wagon
03-26-2012, 07:55 PM
Working on a 89 daytona
I have a 2 button traveler and have never had issues, but recently whenever the dome light is turned on, via switch for opening a door it shuts off and erases everything in its memory, time driven, miles and such. This doesnt make any sence to me. I pulled up a wiring diagram and still doesnt make much sence to me, the diming of the traveler works just fine, but its just the extra click over to turn the dome light on that powers it down.
Would desconnecting the headlight switch be worth a shot and see if its that? according to the wiring diagram it says the traveler aka trip navigator on mitchell is ran like so
#3 terminal is battery
4 is distance sensor
5 is display dimming
6 is low fuel ecu pin 1-36???
7&8 are blank
9 is ground
10 is illum to fuse #12
11 is fuel tank
12 is ign
and 13 is ground again
if any of that makes sence
When I replaced the headlight switch it did work fine for a while.
Thanks,
Jack
I have a 2 button traveler and have never had issues, but recently whenever the dome light is turned on, via switch for opening a door it shuts off and erases everything in its memory, time driven, miles and such. This doesnt make any sence to me. I pulled up a wiring diagram and still doesnt make much sence to me, the diming of the traveler works just fine, but its just the extra click over to turn the dome light on that powers it down.
Would desconnecting the headlight switch be worth a shot and see if its that? according to the wiring diagram it says the traveler aka trip navigator on mitchell is ran like so
#3 terminal is battery
4 is distance sensor
5 is display dimming
6 is low fuel ecu pin 1-36???
7&8 are blank
9 is ground
10 is illum to fuse #12
11 is fuel tank
12 is ign
and 13 is ground again
if any of that makes sence
When I replaced the headlight switch it did work fine for a while.
Thanks,
Jack