View Full Version : Turbos/Intercoolers: Intercooler Piping
Simsy
02-20-2012, 01:16 AM
Looking for some intercooler piping for my fmic on my r/t
Xtrempickup
02-20-2012, 01:34 PM
i have red silicone elbows, couplings and aluminum straight pipe lengths
Simsy
02-20-2012, 08:14 PM
pics and price?
Xtrempickup
02-21-2012, 10:41 AM
depends what you want
Simsy
02-22-2012, 02:06 AM
enough to go from my turbo to intercooler and from inter cooler to TB lol
Xtrempickup
02-22-2012, 09:59 AM
i cant imagine cause i dont know the size of the ic, the placement of the end tanks etc. i did mine originally with a cheap complete kit from ebay
Simsy
02-22-2012, 11:12 AM
do you have any pics from when you had it finished?
wheming
02-22-2012, 01:27 PM
I used some cheapo universal kits from ebay. Even the 3 ply reinforced silicone couplers are rated for more pressure than our turbos can ouput.
I've noticed the price had gone up a bit when i bought my second kit for Slug. But if you search you can find the lowest price with shipping.
Alot of those kits are the same manufacturer- CXRacing. And there are a few packaged kits. Some have u-bends if you need those. I was able to make the standard kit work.
my android sent this for me using Tapatalk...
J&H Ryan
02-22-2012, 02:10 PM
I got a CX racing kit. Not using very much of it though. I have some elbows and reducers if you need anything.
Xtrempickup
02-23-2012, 10:49 AM
kit i bought have was cheap at the time and i just made it work with little to any cutting, other than to straight lengths. i did spring for T-bolts and hump hoses in certain areas to make it work
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.