ARP head, main stud torque and ARP rod bolts specs

[turbovanman]

Specs using moly lube-

Head studs-use around 80-85 ft/lbs but higher if you experience seepage or lifting. I believe 100 ft/lbs is the tightest you should go

Mains studs are 65 ft/lbs

Rod bolts are 50 ft/lbs.

[turbovanman]

bump.

[Frank]

Ummmm to make a good FAQ writeup to go into the KC, give me the following... a full writeup on how to torq a head, all the various torq methods including how to do it for regular bolts/studs, MP, and ARP.

[turbovanman]

Done.