Need a camshaft for my 84 Shelby Charger

[Woodbine shelby]

Lost the cam and lifters and followers in my 84 shelby charger. We are looking for parts from the dealership but was wondering if any of you had any or know where I can get some. I am looking for new parts and looking for a little more performance. Please post here if you know a good place to look or if you have some for sale.

[tryingbe]

Daily driver or race machine?

[Rattlesnake]

I think I got a brand new 314 Mopar Performance cam with performance sliders, I even cryo treated them.

[tmef]

I have a stock cam and timing belt pulley from an 84 SC. No followers or lifters though.

[turbovanman²]

Daily driver or race machine?

+2, I have a nice stock turbo roller with rocker arms, lifters either stock or PT's if needed.

[Woodbine shelby]

I think I got a brand new 314 Mopar Performance cam with performance sliders, I even cryo treated them.

How much do you want for it? I am going to use it as a daily driver and no turbo. I am putting on a weber carb. Thanks

[mopargriffin]

Heres a stock cam NOS on ebay http://www.ebay.com/itm/NOS-MOPAR-2-2L-NA-Camshaft-Package-Turismo-Omni-Horizon-/170642290313?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item27bb12b689#ht_3219wt_902 Im running the next step up, the mopar .460 lift purple cam along with a weber carb. This cam sounds real good and adds power. If you want to go meaner get a comp cam or a higher lift mopar cam. Make sure you get new springs that are rated for the cam duration. good luck

[capev86]

they don't put zinc in modern oils. so use an additive or do yourself a favor and upgrade to a roller cam and followers. 1988 roller cams had the most aggressive timing (later years were a little more tame). just be sure not to use a turbo cam in a naturally aspirated application. aftermarket has some higher power versions too!