1/2 shaft for a large spline info needed.

[stewdaddy23]

All,
what trannys used the large spline set up? Looking to bu some 1/2 shafts and need to know to make sure. will be using with a 568 large spline tranny. Any one have the dimensions?
Just to make sure you know what i'm talking about. it's the mini drive shaft that bolts by the bearing to the block to run a equal length set up.
Thanks

[tryingbe]

87 and newer car or minivan.

lbody is 88 and newer automatic transmission.

Car's axle is not the same as minivan nor lbody.

[black86glhs]

Yeah, the L-body axles are shorter and the minivan axles are longer than the other cars in the dodge lineup.

[turbovanman²]

The int or jack shaft is also different length's per vehicle line.

http://www.thedodgegarage.com/trans_guide.html#Axle

http://www.turbo-mopar.com/forums/showthread.php?46114-Ok-took-photo-s-of-the-equal-length-axles-and-the-different-bearings!&highlight=length