PDA

View Full Version : HE351VE flange


WVRampage
11-17-2011, 08:03 PM
Do any of you know were I can get a flange for the holset HE351VE so i can get the adapter made to put it on my daytona project.
glhs0426
11-17-2011, 08:39 PM
I found the link over at boostedmopar and looked up the piece you need (http://store.airflo.com/ad411.html).
GLHNSLHT2
11-17-2011, 09:06 PM
love airflow, also like that they're local to me. :)
turbovanmanČ
11-17-2011, 09:53 PM
Ebay has them.
WVRampage
11-18-2011, 07:05 PM
Thank you guys your always a big help one day ill get this thing done and running,its gona be suprising to all that see it.
pauly_no_van
01-13-2012, 03:38 PM
pictures!
those are 10"+ around where you mounting it?
Ondonti
01-14-2012, 05:33 PM
Not happy with using other kinds of v band flanges that are "close"
WVRampage
03-18-2012, 01:22 AM
3839338394
Juggy
03-19-2012, 08:46 AM
is that plum crazy purple?!?!

it looks awesome!!!
WVRampage
03-19-2012, 10:54 PM
yes it is its the original plum crazy.
J&H Ryan
03-21-2012, 03:09 PM
Better than "statutory grape" which is supposedly the first thing that came to one of the designer's mind.
WVRampage
03-24-2012, 11:30 PM
385193852038521
Heres a few pics of the engine with the turbo on it bolted in the car,and the reinforcments to the rad support near motor mount,And yes I know thats a 525 trans boled to it its just there to hold the engine in so I can get the wiring and pluming done.
WVRampage
08-13-2014, 10:21 PM
51444

It all in the car and running. SRT4 engine, auto trans with RMVB, MS3 Pro.
Vigo
09-19-2014, 04:31 PM
Link doesnt work but Woah! Now i have to see more..
Ondonti
09-21-2014, 08:49 AM
What did you do for the flange?
WVRampage
06-28-2016, 09:34 PM
a local fab shop with a CNC plasma cut a flange for me after I gave him the gasket. Also he cut a T3 flange for me and I welded them together with a little over an inch between them so i could bolt it up from either side. I dont have pictures of that part but its working.