Looking for an air bag diag. cable for a DRB II

[CBMDennis]

I'm looking for the cable that runs from the DRB II to the air bag diag. connector (Need DRB II to squib connector cable)

[CBMDennis]

Still looking.

[TopDollar69]

Do you know the part number for the cable? I'm pretty sure you can still buy new ones from OTC if you have the part number. I bought a DRB II and I can get it to work with the airbag on my 90 Imperial through the 6 pin connector under the drivers side of the dash. I'm guessing it needs to be hooked directly to the SRS module like the 88-89 cars, but does it use a special cable then just for the SRS? It does communicate with the Bendix 10 brake system though, which is why I really bought it.

[CBMDennis]

It plugs into the air bag system it's self. I think its CCD Cable (P/N CC1020) that goes from the DRB II to the SRS. If found this info at http://www.wrenchmonkey.com/Webpages/DRB.html . The SRS manual I found at
http://www.wrenchmonkey.com/Images/DRB/SRS.pdf

Dennis

[CBMDennis]

any one

[TopDollar69]

I have a CCD cable you can borrow if you promise to send it back to me when you're done with it. You can still buy them from OTC from what I understand.

[CBMDennis]

Found one on ebay