phaxtris
07-24-2006, 02:38 PM
so i unfortunatly blew another turbo last week, while swapping the old one out i decided my old custom swing valve just wasnt doing it for me any more, plus the flange had warped and had a bit of a leak
so after a couple hours this is what i threw together with ---- in the garage, its all made from a piece of 3" 304ss unknown wall pipe, hooks up to the stock exhaust via band clamp and a section of 3" ss flex pipe
i had to modify it slughtly from the pictures, i found the outlet was pointing almost directly at the crossmember, so i angled the outlet further back
anyways, here is the new one
http://i65.photobucket.com/albums/h221/Badachew/image_00003.jpg
http://i65.photobucket.com/albums/h221/Badachew/image_00002.jpg
http://i65.photobucket.com/albums/h221/Badachew/image_00001.jpg
so after a couple hours this is what i threw together with ---- in the garage, its all made from a piece of 3" 304ss unknown wall pipe, hooks up to the stock exhaust via band clamp and a section of 3" ss flex pipe
i had to modify it slughtly from the pictures, i found the outlet was pointing almost directly at the crossmember, so i angled the outlet further back
anyways, here is the new one
http://i65.photobucket.com/albums/h221/Badachew/image_00003.jpg
http://i65.photobucket.com/albums/h221/Badachew/image_00002.jpg
http://i65.photobucket.com/albums/h221/Badachew/image_00001.jpg