89 Fiberide Center Caps ?

[shelbycsx4me]

Hi All,
I'm needing a couple things and want to loose one for my 89's.
First. ... ... Are there any suitable substitutions for the Fiberride Center Caps?
2nd ... ... Whats the Paint Code for the Wheels? PPG or otherwise...
3rd . .. ... Does anyone want a Razzi Rear Bumper Cover ? I don't.
Steve
Iowa
89 CSX-VNT #237 W I D E+R
89 CSX-VNT #339 Recaro
89 CSX-VNT #467
87 CSX #311
90 Goldwing
03 Durango
2010 Challenger

[CoolV300C]

The gold color discussion came up on here a long time ago, I think it ended up that no one knew. And most left today are different colors due to feding and wear and tear.

[martin kolner]

I have a feeling that some other wheel centers may fit this application. Many wheel centers had that same diameter and were either alumium or plastic. As for the paint you can get it matched and mixed.

4284004 (4284012 cast on back) fits 1984-96 is aluminum and pops into the wheel. Will check on OD for you.

[martin kolner]

OK LADIES AND GERMS: WE HAVE A WINNER


http://i153.photobucket.com/albums/s228/buttdrip/IMG_7866.jpg

THE 2 ON THE LEFT ARE PLASTIC AND ARE CAST ON THE BACK WITH 4284702. THE ACTUAL # IN THE PART BOOK IS: X086GW7

ABOUT 3/8 INCH TALL. THEY CAME IN VARIOUS COLORS 1988-94 J BODY. ALL START WITH #X086 AND THEN VARIOUS COLOR CODES. THESE ARE IDENTICAL TO THE ONES USED ON THE 89 SHELBY WHEELS EXCEPT FOR THE COLOR.

THE 3 ON THE LEFT ARE AN ALUMINUM DISC RIVETED TO A STEEL RETAINER WITH 8 LONG MOUNTING PRONGS ,HAVE A CASTING # OF 4284012 AND THE ACTUAL # IS 4284004. USED 1984-96 ON LOTS OF WHEELS. 3/4 INCH TALL

BOTH TYPES ARE 1 15/16 INCHES ACROSS. BOTH OF THEM FIT IN THE FIBERIDE WHEELS AS I HAVE A SET OF 4 AND I STUCK THEM IN.
NO DOUBT THERE ARE OTHER CENTER CAPS ON THE MOPARS THAT WILL ALSO WORK AS LONG AS THE DIAMETER IS THE SAME. I HAVE THESE CAPS NOS AND USED AND I'M SURE THAT THESE ARE RELATIVELY COMMON AND SHOULD NOT BE DIFFICULT TO LOCATE.