PDA

View Full Version : Anyone running H1c / HX40 twin setup ?



Chevodge
10-13-2011, 12:09 AM
Hey guys new here, i got a "big" H1C turbo (inter-cooled model) with a 12cm exh. housing and a HX40w with what i think is a 16cm exh. housing. I'm planing on having the HX40 as my 1st stage (atmospheric side) and the H1C as my 2nd stage, I'm dropping this setup into my 92' Cummins 6bt VE pump. got stock everything at the moment except the fuels turned up, the stock everything part is slowly about to change ;) any feed back would be really helpful i hate doing something wrong the first time and having to do it again! thanks guys hope to hear your thoughts

440dart
10-18-2011, 06:12 PM
not really gaining much as the hx40s are a very minor upgrade over an hx35

tsiconquest88
10-20-2011, 09:00 PM
no he is saying he wants to run 2 turbo's therefore, that combo he is mentioning wouldnt be too bad. Single big turbo imo opinion though lol.

440dart
10-21-2011, 06:35 PM
Since hes running a 12v a big single is very smokey as its hard to controll low boost fueling if it was a used as a toy i would say a single would be fine, If you got the time and the spare money try it out see how it works but if it was me i would spend $500+ and buy a htb3 to go with the stocker or hx40 as a compound setup

Chevodge
10-22-2011, 11:54 PM
the only reason i want to run this combo is because i already have both turbo's and recently put the 12cm housing on my H1c. i already have the likes of a (1 1/2" stainless) W/G in the making just have to modify an old die i had laying around and hook up the piping. but the more searching i do the more i hear people talking smack about the HX40, if i wasn't so cheep I'd probably fork out the cash for a HE351VE but i am cheep.... lol i guess i should add that i'm also doing a liquid to air intercooler on both the HX40 and H1c if i end up running this set up. there's a nice 15"x4" forced induction scoop to feed the hungry twins as-well :)

ShadowFromHell
10-24-2011, 08:52 PM
Where did you find the 12cm housing? Is there a factory application or is it a aftermarket part? I have a 93 auto h1c on the shelf, but I think those have the huge 18c housing that is WAY to big to try to run on a TM.

Chevodge
11-03-2011, 12:08 AM
its off a 4bt out of a street sweaper