PDA

View Full Version : Used parts inventory list



glhs727
09-29-2011, 01:10 PM
We stock not only a huge amount of new parts in the warehouse, but only a large selection of used parts. If you need something, feel free to call 281-288-4411 and ask. I am listing an inventory list, and will add and subtract as time goes on. DO NOT POST in the thread. If you want soemthing call or PM.
Thanks!
Cindy
T-3 ported head, redone, fresh valve job $1200 outright
T-3 stock head, redone, fresh valve job $799 outright
t-3 fuel rail, fresh powdercoated silver $75
t-3 waterbox/t-stat $75
t-3 adj. wga with bracket $65
t-3 air seperater box $25
T-3 adjustable cam gears, used. These are not the 4 bolt FWD style but actually a 6 bolt style custom made for the 8 sec. charger. Silver color $300 pair.
spirit arm rest $50
spirit center console $50
89-94 NOS spirit all 4 doors weatherstripping (door stripping, not window) $250
t-3 coil pack $40
NGK 91-93 r/t plug wires $30
R/T works for G, P, J, and A) rear spring perch/bumper. (These are usually rusted out,) good condition $50 pair
T-3 upper radiator hose $25
r/t trunk weather stripping $40
NOS clockspring for 90-91 spirit $75
NOS clockspring for 91-93 G or P body with cruise and w/o tilt $75
Spirit center tailight section $25
Spirit r/t throttle cable $25
Red spirit r/t molding set $75
white spirit r/t molding set $75
t-3 crank gear, has one broken stud that will need to be removed $50
NOS glhs front airdam $299
good condition blue/silver shelby seats $150 pair
good condition blue/silver door panels (except one speaker grill busted) $100 pair
t-1 garrett wga with bracket $50
polybushings a525 dogbone mount $45
t-1 fuel pressure regulator new $35
84 MP stage 1 computer $100
daytona factory boost gauge message center $15, I have 2 kinds, one with numereric 30/15 and the other has bars instead of numbers... don;t know what fits each year.....
NOS 89-91 daytona front lower airdam $199
stock big can wga's (2) $60 each
small can wga $40
turbo support brackets $10 each
91 daytona rear tailights $50 pair
t-2 regulator new $45 used $35
bosch grand national fuel pressure regulators, snmae as mopar except they are 42 psi. Great for cars running bigger injectors $40
1 pc. intake fuel rail $35
2 pc fuel rail $65
86 lancer chin spoiler $60
VNT turbo wastegate actuator $75
a568 small spline from a vnt car $400
a525 trans, good condition $250
NOS a525 shift rod (I have about 5) this is the straight with a 45 degree on one end and ball sockets on both ends. NOT the horseshoe shaped rod. $40 each
NOS L-body window to door outside seal/molding $180 pair
87/88 t-2 daytona radiators, NEW cores installed, ready to go $350 eac
1897 shelby lancer wiring harness $150
89 lancer t-1 wiring harness $125
87 shelby z bra new $35
eagle talon BOV with pipe $75, w/o pipe $50
3" hump hose red, blue and black available $10 each
2.25" silicone straight red blue and black avail. $5 each
(2) 6-9 intercooler cores for a DYI intercooler $75 for the pair
caravan REAR Koni's NEW $100 pair
NOS MP Carrerra chrome rear shocks for G,H,P, A bodies $100 pair
SOHC intake (metal for early neon) $150
MSD SCI ignition box PN 8300 $100
NOS Imsa 2.0 early forged crank $275
NOS seatbelt extenders (for all you big people LOL!) $10 each
Tall deck block for long rod motor bored .030 and ready to go $300
NEW venolia long rod pistons .030 $410 uses a 2.2 crank and I think 6.0 or 6.1 " rods to make a long rod motor. Just need crank and rods to make a long rod motor.
New DEI universal turbo insulation kit pn 010113 $50

srt-4:
block and bedplate, cleaned and checked, will need to go .020 $275
less than 1K forged dome style srt-4 pistons and eagle rods $625
srt-4 crank good std/std... $175
center console $75
oil pan $75
2.4 pick up tube $25
srt-4 stock sways bar set $65
Stock TB, machined out $75
Mopar short throw shifter $75
driver's side airbag $75
heater controls $35
solid upper motor mount $50
water pump $35

moparman76_69
09-29-2011, 05:38 PM
I'm assuming srt-4 HSK means head stud kit? I also assume they are used?

glhs727
09-29-2011, 07:41 PM
yes, HSK = Head stud kit. All parts should be considered used unless it says NEW or NOS

minigts
09-30-2011, 12:14 AM
Cindy, what is the NOS L-body window to door outside seal/molding $180 pair? If this is the foam stuff that seals the windows, I'd like pictures and first dibs on them for purchase please. If not, I'd still like pictures. :D If these are they, I will pay tonight.

OOPS!!! Just read the first part of the thread!!! I'll call tomorrow. :p

glhs727
01-25-2012, 12:37 AM
removed sold items... update 1/24/2012

glhs727
01-25-2013, 04:31 PM
UPDATED LIST!!! 01/25/13


t-3 fuel rail, fresh powdercoated silver $75
t-3 waterbox/t-stat $65
t-3 adj. wga with bracket $65
t-3 air seperater box $25

spirit arm rest $50
spirit center console $50
89-94 NOS spirit all 4 doors weatherstripping (door stripping, not window) $250
t-3 coil pack $40
NGK 91-93 r/t plug wires $30
R/T works for G, P, J, and A) rear spring perch/bumper. (These are usually rusted out,) good condition $50 pair
T-3 upper radiator hose $25
r/t trunk weather stripping $40
NOS clockspring for 90-91 spirit $75
NOS clockspring for 91-93 G or P body with cruise and w/o tilt $75
Spirit center tailight section $25
Spirit r/t throttle cable $25

white spirit r/t molding set $75

NOS glhs front airdam $299
good condition blue/silver shelby seats $150 pair

t-1 garrett wga with bracket $50

t-1 fuel pressure regulator new $35

daytona factory boost gauge message center $15, I have 2 kinds, one with numereric 30/15 and the other has bars instead of numbers... don;t know what fits each year.....
NOS 89-91 daytona front lower airdam $199
shadow rear spoiler (escsx type NOT CSX-VNT type) $75
small can wga $40
turbo support brackets $10 each
91 daytona rear tailights $50 pair
t-2 fuel regulator used $35

1 pc. intake fuel rail $35
2 pc fuel rail $65
86 lancer chin spoiler $60

NOS a525 shift rod (I have about 5) this is the straight with a 45 degree on one end and ball sockets on both ends. NOT the horseshoe shaped rod. $40 each
NOS L-body window to door outside seal/molding $180 pair
87/88 t-2 daytona radiators, NEW cores installed, ready to go $350 each
87 shelby z bra new $35
eagle talon BOV with pipe $75, w/o pipe $50
3" hump hose red, blue and black available $10 each
2.25" silicone straight red blue and black avail. $5 each
(2) 6-9 intercooler cores for a DYI intercooler $75 for the pair

NOS MP Carrerra chrome rear shocks for G,H,P, A bodies $100 pair
SOHC intake (metal for early neon) $150
MSD SCI ignition box PN 8300 $100
NOS Imsa 2.0 early forged crank $275
NOS seatbelt extenders (for all you big people LOL!) $10 each
Tall deck block for long rod motor bored .030 and ready to go $300
NEW venolia long rod pistons .030 $410 uses a 2.2 crank and I think 6.0 or 6.1 " rods to make a long rod motor. Just need crank and rods to make a long rod motor.


srt-4:
block and bedplate, cleaned and checked, will need to go .020 $275
srt-4 crank good std/std... $175
oil pan $75
2.4 pick up tube $25
srt-4 stock sways bar set $65
driver's side airbag $75
heater controls $35
solid upper motor mount $50
water pump $35
Good stock headlights $75 pair
excellent stock taillights $75 pair
stock turbo line set $60

bigbluejavelin
03-11-2014, 05:59 PM
I need one of the 525 shift rods, but cannot find them on the FWD Performance site. I can pay with paypal. Ship to address is :
Mark G Smith
360 Dorwil Drive
Akron Ohio 44319
email : bibluejavelin2@sbcglobal.net
Help, car has been stuck in3rd gear for 2 weeks!